1.22.2

[Koenkk]

Notes

• A new firmware for adapters based on the CC1352 and CC2652 has been released, check the release for the files and changelog.
• For those using external converters for TuYa devices: the names of the commands and payloads have been changed for TuYa specific commands. Your external converter probably has to be updated, this changeset should help you on what to change.

Improvements

• #3452 Setup battery % reporting for Silvercrest HG06336
• Zemismart Tuya Zigbee Socket #10045 Support power_on_behavior and backlight_mode for TS011F_2_gang_wall
• #3496 Support battery % reporting for TuYa TS0043
• #3491 Increase range and precision for exposed local temperature calibration
• #3526 Add radiator_covered for Danfoss 014G2461
• #3499 Add programming_operation_mode for Popp 701721, Hive UK7004240 and Danfoss 014G2461
• #3532 Improvements for TV02-Zigbee and BRT-100-TRV
• #3545 Support electrical measurements for Sinope TH1300ZB
• SNZB-03 dies at 80% battery #10259 Improve battery % accuracy for SNZB-01 and SNZB-03
• #3558 Support OTA for Xiaomi QBCZ15LM
• #3557 Expose action_duration for Philips 324131092621
• #3568 Expose power_on_behavior for IKEA TRADFRI drivers
• Show coordinator ieee address in frontend (settings -> about)
• #3499 Expose programming_operation_mode for Danfoss 014G2461, Hive UK7004240 and Popp 701721
• Allow read/write to unsupported devices
• No white channel on RGBW controller 'TS0504B' #6408 Allow to enable white channel of TuYa TS0504B
• Add poll for updates after bound remote command for TuYa device TS0501B #10379 Poll TuYa devices for updates when bound remote changes its state
• #3585 Expose temperature for Xiaomi MCCGQ14LM
• #3586 Fix TuYa MIR-HE200-TY motion_direction exposes
• Modified Converter works but entities not showing up on Home Assistant. #10414 Expose power measurements for SmartThings IM6001-OTP05
• #3596 Expose heating for SEA801-Zigbee/SEA802-Zigbee

Fixes

• #3445 Fix max boost_time for TuYa TS0601_thermostat
• MQTT template error in HA for Xiaomi ZNCLDJ11LM when homeassistant_legacy_entity_attributes is disabled #9939 Fix Home Assistant template error for update sensor
• TS0601 - TZE200_chyvmhay' Thermostat not supported - please add if possible #8934 Fix Lidl Silvercrest thermostat 368308_2010 making Home Assistant addon crash
• last_seen attribute is not updated in topic for some devices #7423 Fix last_seen not always updated
• Danfoss Ally TRV after upgrade to 1.22 Error external room sensor invalid value -8000.0 (range 0.0 - 100.0) #9972 Fix Home Assistant "Invalid value for" warning for number entities
• #3464 Fix Neo NAS-PD07 humidity/temperature not always correct
• #3264 Fix msg.device.getEndpoint is not a function exception for HY08WE
• Battery information of Xiaomi WSDCGQ12LM not loading. #9952 Fix battery/voltage being 0/null for Aqara Opple devices
• Heiman HS1SA recognized as HS3SA-E #9919 Fix HEIMAN HS3SA detected as HS1SA
• Allow to disable measurement polling for TS0121_plug, HS2SK_nxp and TS011F_plug_3
• returning log message #9962 Validate QOS value
• After OTA update Ikea E1524/E1810 can't be bound to group - how to downgrade? #7716 Ikea Shortcut Button (E1812) Stops Working After Pairing #7150 Fix IKEA remotes not working after OTA update version >= 2.3.75
• #3483 Fix SONOFF SNZB-02 temperature reporting interval
• Socket TS011F manufacturer _TZ3000_w0qqde0g not reporting anything except linkquality and on/off #9797 Fix power measurements not working for some TS011F plugs
• filtered_attributes publishes attributes with 'null' values #10099 Fix filtered attributes being published as null
• Energy is not reported by TS0121_plug #7272 Fix energy not reported for TS0121_plug
• #3505 Disable color temperature for Philips 433714
• Add sensor.last_seen when homeassistant_legacy_entity_attributes is false #8287 Fix error for Home Assistant last_seen sensor when epoch is used
• Can't disable "new availability feature" #9907 Cleanup availability experimental log
• #472 Fix Cluster 'XXX' has no attribute 'XXX' error on read response
• Device skips interview on remove + join unless z2m is restarted #10108 Fix device data persisted when device is removed
• #3515 Fix Xiaomi QBKG19LM, QBKG20LM, QBKG39LM, QBKG41LM and QBCZ15LM state in payload without endpoint
• Zigbee2Mqtt Crashes with Sengled RGB Lights #10174 Fix crash with error: Error: Cluster with name 'XXX' does not exist
• #3520 Fix Sinope TH1124ZB and TH1300ZB pi_heating_demand value
• #3498 TuYa MIR-HE200-TY make presence and motion bool instead of string
• Configure what a Zigbee "heterogeneous" group "exposes" through Z2M #10120 Fix list not overridable in Home Assistant discovery payload
• #3539 Fix configure reporting error for TuYa TS0043
• "No update available" when clearly an update *should be* available #10131 Fix device properties (e.g swBuildId) not being updated on report by device
• #3351 Fix Sinope TH1123ZB configuration
• #3553 Fix Xiaomi QBKG25LM and QBKG26LM actions
• Ikea STYRBAR Remote E2002 sends each message twice  #10008 Fix double actions for IKEA E2001/E2002 and E1812
• #3567 Fix running state not reported for Acova PERCALE2
• #3574 Fix Xiaomi MCCGQ12LM not working
• #3576 Fix max load_room_mean value for Danfoss 014G2461, Hive UK7004240 and Popp 701721
• [Problem]: toggle does not work correctly on Philips HUE (8719514328242) #10355 Fix TOGGLE not working when transition is used
• #3584 Fix Sinope TH1300ZB configure
• #10403 Fix AC26940/AC31266 not reporting state when controlled physically
• Incorrect state message for Schneider Electric 545D6102 #9646 Fix physical state changes not reported for Schneider Electric 545D6514
• Attribute names change between 1.21 and 1.22? #10423 Fix set message with endpoint in payload where the endpoint name ends with a number not working

New supported devices

This release adds support for 55 new devices:

• 14153905L Lidl Livarno Home LED floor lamp
• 1743430P7 Philips Hue Impress outdoor Pedestal
• 1743730P7 Philips Hue Calla outdoor
• 1746447P7 Philips Hue outdoor Resonate wall lamp (silver)
• 3802961 Namron LED 9W CCT E27
• 4058075168572 LEDVANCE SMART+ lamp E27 turntable white
• 4062172044776_2 OSRAM Zigbee 3.0 DALI CONV LI dimmer for DALI-based luminaires (one device and pushbutton)
• 4062172044776_3 OSRAM Zigbee 3.0 DALI CONV LI dimmer for DALI-based luminaires (with two devices)
• 4062172044776_4 OSRAM Zigbee 3.0 DALI CONV LI dimmer for DALI-based luminaires (with two devices and pushbutton)
• 5128.10 Iluminize Zigbee 3.0 switch shutter SW with level control
• 75564 Sylvania Smart+ adjustable white and full color bulb A19
• 8718801528334 Ynoa Remote control one button dimmer
• 915005986901 Philips Hue White and color ambiance Gradient Signe table lamp (white)
• 929003054001 Philips Hue Wellness table lamp
• 9290030674 Philips Hue motion outdoor sensor
• 929003099001 Philips Hue white ambiance Aurelle square panel light
• 99140-031 Kwikset SmartCode traditional electronic deadbolt
• CCT5015-0001 Schneider Electric Roller shutter module
• E6 Nous Temperature & humidity LCD sensor
• EFEKTA_PWS_Max Custom devices (DiY) Plant watering sensor EFEKTA PWS max
• EFEKTA_THP Custom devices (DiY) DIY temperature, humidity and atmospheric pressure sensor, long battery life
• EFEKTA_eON213wz Custom devices (DiY) Mini weather station, digital barometer, forecast, charts, temperature, humidity
• EFEKTA_eON213z Custom devices (DiY) Temperature and humidity sensor with e-ink2.13
• EFEKTA_miniPWS Custom devices (DiY) Mini plant wattering sensor
• EKO09716 Schneider Electric Zigbee smart socket with power meter
• EKO09738 Schneider Electric Zigbee smart socket with power meter
• ERS-10TZBVK-AA TuYa Smart knob
• GL-SD-002 Gledopto Zigbee 3.0 smart home switch
• HAL500 Schwaiger LED bulb GU10 350 lumen, dimmable, color, white 2700-6500K
• HG06620 Lidl Silvercrest garden spike with 2 sockets
• KB-B540R-ZB Dawon DNS IOT smart plug 16A
• KB-HD100-ZB Dawon DNS IOT Card holder
• MCCGQ13LM Xiaomi Aqara P1 door & window contact sensor
• NUE-AUWZO2 Nue / 3A Smart Zigbee double power point
• PERCALE2 Acova Percale 2 heater
• PRL-1ZBS-12/24V Climax Zigbee 12-24V relay controller
• PS600 Salus Controls Pipe temperature sensor
• ROB_200-016-0 ROBB smart RGB CCT DIM 3 in 1 Zigbee Remote
• ROB_200-017-1 ROBB Zigbee smart plug
• RS 227 T Innr GU10 spot 420 lm, dimmable, white spectrum
• S520567 Schneider Electric Roller shutter
• SLT3C Hive Heating thermostat remote control
• SR-ZGP2801K2-DIM Sunricher Pushbutton transmitter module
• SR-ZGP2801K4-DIM Sunricher Pushbutton transmitter module
• SWITCH-ZR02 eWeLink Zigbee smart switch
• THS317-ET OWON Temperature and humidity sensor
• TS1101_dimmer_module_1ch TuYa Zigbee dimmer module 1 channel
• WB-MSW-ZIGBEE v.3 Sprut.device Wall-mounted Zigbee sensor
• WK34-EU LELLKI Power socket EU (with power monitoring)
• WP30-EU LELLKI Power cord 4 sockets EU (with power monitoring)
• WP34-EU LELLKI Outlet power cord with 4 sockets and 2 USB
• WSD500A TuYa Temperature & humidity sensor
• XF-EU-S100-1-M LELLKI Touch switch 1 gang (with power monitoring)
• ZFU-1D-CH Siglis zigfred uno smart in-wall switch
• ZM-RM02 Zemismart Smart 6 key scene switch

---

This discussion was created from the release 1.22.2.

[c0mplex1]

Great. 👍
Thank you.

[Volcano-28]

Unfortunately my new support request #10300 wasn't solved or even commented.

[flaektrem]

@Koenkk Is it safe to update firmware on CC2652 (ZigStar LAN Gateway) without loosing any paired devices? I can´t find any instructions for updating fw, just flash new fw.

[flaektrem]

Ahh, missed that little section in the docs. Thank you

[kevincaradant]

@Koenkk
What is the benefits to have the latest fw ? I mean you said: "allow to set the setting transmit power".
Where is it possible to set it ? The UI of Z2M ?

Also, what is the current setting transmit power on the "previous" firmware ? Is it 9 like this one ?

Last question, Is it better to put 5 or 20 ? More it's high, better will be the link quality, but I guess, we will have more interference with the neighbour wifi for example or I totally wrong on that ?

Thank you

Edit: I can answer my self about the power transmit default value in the prvious one.
"description": "Transmit power of adapter, only available for Z-Stack (CC253*/CC2652/CC1352) adapters, CC2652 = 5dbm, CC1352 max is = 20dbm (5dbm default)",
So it's 5.

Why only 5 ? I thought it was 20 when we talk about it the last year :)

[Koenkk]

Because more != better, the default will be 9dbm for CC1352P and CC2652P coordinators.

[kevincaradant]

Ok thank you, but I'm not familiar with this , that's why I asked if it was useful to upgrade it with a CC1352P like mine or not really :)

[segaura]

safe, updating is the same procedure as reflashing the fw

Really cool.
Is there a way, maybe in some experimental branch, to move from Conbee II to a CC2652x-based coordinator without re-pairing?
I'll be glad to offer my objects and time for testing.

p.s. thank you also for SWITCH-ZR02 support!!

[jeroenvdd]

hi after flashing my slae.sh stick and updateing, most things seem to work, but my ikea motion sensors are having troubles,

any clue on how to get these back up?

[kevincaradant]

Did you tried to pair it again or reconfigure it again (from the UI) ? What is the issue ? the Last Seen ?

[jeroenvdd]

Did you tried to pair it again or reconfigure it again (from the UI) ? What is the issue ? the Last Seen ?

if i pres reconfigure in UI it times out, and problem with repairing is i have lots of them :D and you need to pull em of the wall and physically push the button on the back..

[kevincaradant]

OK I see :).

I believe that I read somewhere that the power transit can create some issues with some devices. Maybe the new value at 9DB is the reason ? I didn't update yet. I didn't have my answer about the power transit editing ( question just above than your ^^ ) but I guess you can set it in the UI ? Try 5 Db like the previous firmware maybe ? Otherwise I don't know sorry

Edit; in the doc of Koenkk I saw this:

Updating the coordinator firmware.
If after flashing you fail to control your devices it helps to:
Wait a few minutes so that the Zigbee network can settle.
Send Zigbee commands (e.g. turn on/off) to the device.
Reboot the device (unplug and plug power).

[Safs]

Is time synchronisation fixed for BHT-002-GCLZB?

[samourai64]

Yes good idea. I have the same problem and the program mode is not possible because time is never good
Thanks

[nicoxygen]

same problem too

[Safs]

With 1.22.1-1 version synchronisation working well.

[nicoxygen]

with 1.22.2 syncronize time on BHT-002 don't work