1.26.0

[Koenkk]

Features

• Backup function within settings/tools #12731 Allow to create backup via zigbee2mqtt/bridge/request/backup and frontend (Settings -> Tools -> Request data folder backup)
• Add group off_state option #12868 Add group off_state option

Improvements

• #4309 Expose battery voltage for Perenio PECWS01
• Sercom SZ-ESW01-AU not reporting energy properly to HASS #11469 Expose energy, current and voltage for Sercomm SZ-ESW01-AU
• #3401 Expose power_on_behavior for TuYa TS0004
• #4325 Expose occupied_cooling_setpoint for Zen Zen-01-W
• #4324 Expose report_delay for EFEKTA_miniPWS
• #4329 Send hourly data updates of Xiaomi GZCGQ01LM
• #4310 Expose battery and battery_low for TuYa S-LUX-ZB (_TZE200_pisltm67)
• State issue with a group composed of one Lidl HG06338 #12693 Send cached group state on startup and when Home Assistant comes online
• #4344 Expose battery for Develco WISZB-120
• Aqara wall switches (with neutra) - missing "energy" in HA #12687 Expose energy for Xiaomi QBKG11LM and QBKG12LM
• HA: The 'send_if_off' option is deprecated, please remove it from your configuration #11738 Change Home Assistant hold_mode to preset_mode and expose away_mode as separate switch
• #4352 Add and correct whiteLabel for some Xiaomi devices
• #4353 Support ota for TS011F_din_smart_relay
• Schneider Wiser roller shutter S520567 #10303 Expose lift_duration for Schneider Electric S520567
• #551 Support touchlink for EZSP adapter
• #4369 Expose side for Xiaomi MFKZQ01LM
• Add more settings to secrets #12904 Allow to specify MQTT server in secrets
• Tuya/Moes GU10 bulb TS0505B (_TZ3210_rcggc0ys) - add missing tuya_do_not_disturb and tuya_color_power_on_behavior #12919 Move _TZ3210_rcggc0ys to Moes ZLD-RCW

Fixes

• Third Reality devices need to have their power sources changed to battery #12666 Fix power source of Third Reality 3RDS17BZ and 3RMS16BZ incorrect
• Curtain was supported and now is not (TS0601_Cover) #12677 Fix _TZE200_sbordckq not recognized anymore
• #4308 Fix adaptation_run_control values for Danfoss 014G2461
• #4310 Fix illuminance_lux and battery values being a string instead of number for TuYa S-LUX-ZB
• Third Reality devices need to have their power sources changed to battery #12666 Fix battery percentage of Third Reality 3RMS16BZ incorrect
• Device with Zigbee model 'TS011F' and manufacturer name '_TZ3000_cphmq0q7' #7405 Identify _TZ3000_v4mevirn as ZIGBEE-B09-UK
• #4284 Fix running_state for Centralite 3156105
• A light used to work, now is unsupported #12701 Fix whitelabel CCT Light not being recognised anymore
• Müller Licht Remote identified wrong #12651 Fix power source of Müller Licht 404022
• DANALOCK and Pin code support #12706 Add back pin_code expose for Danalock V3-BTZB/V3-BTZBE
• Lellki WP33-EU powerstrip control #12734 Fix not able to individually control outputs of LELLKI WP33-EU/WP34-EU
• Zemismart wall socket ZIGBEE-B09-UK can't control L1/L2 separately  #12736 Fix not able to individually control outputs of Zemismart ZIGBEE-B09-UK
• Sengled E1C-NB7 No image available for imageType '32886' #12740 Disable OTA for Sengled E1C-NB7 since none is available
• Hue 929002376801 is not exposing full capabilities #12749 Fix color_temperature not exposed for Philips 929002376801
• M515egbzn (TS0601 _TZE200_xuzcvlku) blind motor doesn't get state and position #12719 Fix TuYa TS0601_cover not reporting position
• Update zigbee-herdsman to 0.13.0 #4310 Fix TuYa S-LUX-ZB battery_low being a string instead of boolean
• Yale YDF40 - Failed to interview ALWAYS #12750 Fix Yale YDF40 interview failing
• BHT-002-GCLZB Thermostat showing wrong local temperature. Divided by 10 #12811 Fix Moes BHT-002-GCLZB (_TZE200_ztvwu4nk) temperature divided by 10
• Woox R7060 Garden irrigation no battery level/voltage #12163 Fix battery not exposed for Woox R7060
• Hue 929002376101 is not exposing colortemp #12846 Fix Philips 929002376101 not exposing color temperature
• ORVIBO ST30 often reports none for temperature #9847 Fix temperature: null published for ORVIBO ST30
• #4356 Expose led_disabled_night, mode_switch, power_outage_count and device_temperature for Xiaomi WS-EUK01 and WS-EUK02
• #4365 Fix Envilar ZG50CC-CCT-DRIVER not exposing color temperature
• Philips HUE 929003055801 not showing OTA updates #12899 Fix OTA not enabled for some Philips Hue lights
• #4376 Move _TZ3000_nzkqcvvs from TS011F_plug_1 to TS011F_plug_2 since it doesn't support energy measurements
• #4379 Expose power_outage_count for more Xiaomi devices
• Frontend URL environment variable not working? #12911 Fix setting some settings via environment variable not working (e.g. ZIGBEE2MQTT_CONFIG_FRONTEND_URL)
• RGB Genie ZB-5001 Master On/Off Buttons are not Handled Properly #12957 Fix RGB Genie missing actions for master on/off buttons
• #4387 Fix no battery value for TuYa WSD500A
• #4385 Fix TuYa power_outage_memory converter
• Jasco 43132 does not show Energy or Power values #12588 Fix no energy and power values for Jasco 43132

New supported devices

This release adds support for 32 new devices:

• 5047231P6 Philips Hue White ambiance Buckram double spotlight
• 5047331P6 Philips Hue White ambiance Buckram triple spotlight
• 552-72201 Niko Connectable dimmer
• 552-72301 Niko Connectable motor control
• 9290018609 Philips Hue White E26 806 lumen
• 929002376703 Philips Hue Iris silver special edition (generation 4)
• 94191 Paulmann Plug & shine LED strip
• AC23684 LEDVANCE Classic E26 tunable white 9w 800 lumen
• BSEED_TS0601_cover BSEED Zigbee curtain switch
• D086-ZG HZC Electric Zigbee dual dimmer
• HG08010 Lidl Livarno Home outdoor spotlight
• HG08131C Lidl Livarno Home outdoor E27 bulb in set with flare
• HG08383B Lidl Livarno outdoor LED light chain
• HS1CG Heiman Smart combustible gas sensor
• LDSENK09 ADEO Security system key fob
• MP-840 Visonic Long range pet immune PIR motion sensor
• PC321 OWON 3-Phase clamp power meter
• QT06 GiEX Water irrigation valve
• RMC002 Bouffalolab US plug smart socket
• ROB_200-030-0 ROBB Zigbee AC in wall switch 400W (2-wire)
• S40ZBTPB SONOFF 15A Zigbee smart plug
• SMART-SMOKE10 Alecto Smoke detector
• SR-ZGP2801K-5C Sunricher Pushbutton transmitter module
• SRB01 Evvr In-wall relay switch
• TB26-4 Zemismart 4-gang smart wall switch
• TB26-6 Zemismart 6-gang smart wall switch
• UFO-R11 Moes Universal smart IR remote control
• ZB-Sm TuYa Tubular motor
• ZNCLBL01LM Xiaomi Aqara curtain driver E1
• ZS06 TuYa Universal smart IR remote control
• ZSDR-850 Trust Smoke detector
• ZXZIR-02 AUBESS Universal smart IR remote control

---

This discussion was created from the release 1.26.0.

[MichalKrasowski]

Broken for me.

s6-rc: info: service s6rc-oneshot-runner: starting
s6-rc: info: service s6rc-oneshot-runner successfully started
s6-rc: info: service fix-attrs: starting
s6-rc: info: service fix-attrs successfully started
s6-rc: info: service legacy-cont-init: starting
cont-init: info: running /etc/cont-init.d/socat.sh
[22:28:27] INFO: Socat not enabled, marking service as down
cont-init: info: /etc/cont-init.d/socat.sh exited 0
cont-init: info: running /etc/cont-init.d/zigbee2mqtt.sh
cont-init: info: /etc/cont-init.d/zigbee2mqtt.sh exited 0
s6-rc: info: service legacy-cont-init successfully started
s6-rc: info: service legacy-services: starting
services-up: info: copying legacy longrun socat (no readiness notification)
services-up: info: copying legacy longrun zigbee2mqtt (no readiness notification)
[22:28:34] INFO: Handing over control to Zigbee2MQTT Core ...

[email protected] start
node index.js
/app/dist/util/externally-loaded.js:62
.withAwayMode()
^
TypeError: exposes.climate(...).withSetpoint(...).withLocalTemperature(...).withSystemMode(...).withLocalTemperatureCalibration(...).withAwayMode is not a function
at /app/dist/util/externally-loaded.js:62:14
at Script.runInContext (node:vm:139:12)
at Script.runInNewContext (node:vm:144:17)
at Object.runInNewContext (node:vm:298:38)
at loadModuleFromText (/app/lib/util/utils.ts:148:8)
at loadModuleFromFile (/app/lib/util/utils.ts:155:12)
at Object.getExternalConvertersDefinitions (/app/lib/util/utils.ts:165:25)
at getExternalConvertersDefinitions.next ()
at new ExternalConverters (/app/lib/extension/externalConverters.ts:12:20)
at new Controller (/app/lib/controller.ts:84:58)

[MichalKrasowski]

Nope :(

data_path: /share/zigbee2mqtt
socat:
enabled: false
master: pty,raw,echo=0,link=/dev/ttyZ2M,mode=777
slave: tcp-listen:8485,keepalive,nodelay,reuseaddr,keepidle=1,keepintvl=1,keepcnt=5
options: '-d -d'
log: false
restartdelay: 1
initialdelay: 1
mqtt:
base_topic: zigbee2mqtt
server: mqtt://core-mosquitto
user: ######
password: #####
serial:
port: /dev/ttyUSB0
devices: devices.yaml
groups: groups.yaml
homeassistant: true
permit_join: false
advanced:
log_level: info
pan_id: 6754
channel: 11
network_key:

availability_blocklist: []
availability_passlist: []
device_options: {}
blocklist: []
passlist: []
queue: {}
frontend:
port: 8099
experimental:
new_api: true

[MichalKrasowski]

Partially restored backup to downgrade Z2M to 1.25.2, good as new.

1.26.0 unfortunately still broken for me 💔

[Koenkk]

check if there are external converters in /share/zigbee2mqtt/configuration.yaml.

[tonyt2975]

This was the problem I was having, this solution worked for me. Thank you

[MichalKrasowski]

Ok, I've verified the existance of /share/zigbee2mqtt/configuration.yaml, indeed the external converter was there, removed it, works now.

[chersoph]

After uppdate M2Z will not start.
info 2022-07-27 11:22:55: Logging to console and directory: '/config/zigbee2mqtt/log/2022-07-27.11-22-54' filename: log.txt
info 2022-07-27 11:22:55: Starting Zigbee2MQTT version 1.26.0 (commit #unknown)
info 2022-07-27 11:22:55: Starting zigbee-herdsman (0.14.40)
error 2022-07-27 11:23:07: Error while starting zigbee-herdsman
error 2022-07-27 11:23:07: Failed to start zigbee
error 2022-07-27 11:23:07: Check https://www.zigbee2mqtt.io/guide/installation/20_zigbee2mqtt-fails-to-start.html for possible solutions
error 2022-07-27 11:23:07: Exiting...
error 2022-07-27 11:23:07: undefined

Addon configuration (unchanges since upgrade)
data_path: /config/zigbee2mqtt
socat:
enabled: false
master: pty,raw,echo=0,link=/tmp/ttyZ2M,mode=777
slave: tcp-listen:8485,keepalive,nodelay,reuseaddr,keepidle=1,keepintvl=1,keepcnt=5
options: '-d -d'
log: false
mqtt: {}
serial:
port: /dev/ttyS0
adapter: deconz

configuration.yaml
homeassistant: true
mqtt:
server: mqtt://core-mosquitto:1883
user: ####
password: #####
serial:
port: /dev/ttyS0
adapter: deconz
frontend:
port: 8099
devices:

groups:

permit_join: false