Skip to content

Releases: Koenkk/zigbee2mqtt

1.22.1

01 Dec 16:22
Compare
Choose a tag to compare

Notes

  • For Home Assistant users only: because of the added entity_category support this release requires at least Home Assistant 2021.11.0
  • For people using CC2530/CC2531 adapters: a new firmware has been released (20211115 and 20211116). This update is important for CC2530 users since it fixes an issue where the CC2530 has to be replugged when restarting Zigbee2MQTT. Link to new firmwares and changelog.

Improvements

  • #3269 Increase interval for pIHeatingDemand to save thermostat battery
  • #9293 #9309 #9305 Add Home Assistant entity_category support
  • #9312 Add support for unit of measurement to Home Assistant number entities
  • #3281 Expose off action for IKEA E1812
  • #3268 Normalise attribute reporting intervals
  • #9306 Expose update_available sensor with device_class update to Home Assistant
  • #3285 Improve Xiaomi WSDCGQ11LM pressure accuracy
  • #9511 Show actual firmware version of device in Home Assistant instead of Zigbee2MQTT version
  • #3288 Change TuYa TS0601_rcbo current measurement unit from mA to A
  • #446 Check-in command support
  • #447 Try to immediately send command to devices when sendWhenActive is used
  • #3308 Expose binary vibration sensor for Xiaomi DJT11LM
  • #3313 Support power_on_behavior for TuYa TS0115
  • #9465 Support switch_type for TuYa TS0011_switch_module, TS0012_switch_module and TS0013_switch_module
  • #3323 Add cool system_mode for Zen-01-W
  • #9574 Show all clusters in frontend (even ones not defined in zigbee-herdsman)
  • #3335 Separately identify TS0011_switch_module, TS0012_switch_module and TS0013_switch_module
  • #3337 Support pulse_configuration, interface_mode and current_summation for Develco ZHEMI101
  • #3330 Improve Aurora Lighting AU-A1ZBR1GW and AU-A1ZBR2GW stability
  • #3341 Add min, max and step value for local_temperature_calibration
  • #3359 Expose battery voltage for Xiaomi GZCGQ01LM
  • #3362 Expose load for ELKO 4523430
  • #9759 Expose pi_heating_demand to Home Assistant
  • #9700 Log failed to ping as warning instead of error
  • #3401 Support more actions for Xiaomi QBKG26LM
  • #9844 Add device class for Home Assistant update available sensor
  • #3423 Add low_battery and check_meter for Develco ZHEMI101

Fixes

  • #3253 Properly handle update available check failing for IKEA device
  • #3267 Fixed PECLS01 battery percentage incorrect
  • #3277 Fix fan_state and fan_mode for IKEA E2007
  • #9089 Fix color_mode key error in Home Assistant for Lidl HG06467
  • #9490 Stop pinging device (availability feature) when it is removed
  • #3284 Add running state for TH1400ZB
  • #9507 Fix invalid frontend.host default value
  • #9012 Fix min/max value for Home Assistant number entity
  • #9520 Fix external extensions not started
  • #9547 Fix Home Assistant discovery message for running_state fan_only
  • #7051 Fix Neo NAS-AB02B0 not working
  • #9539 Fix Tuya TS0003 3 gang switch module recognised as Zemismart ZM-L03E-Z
  • #3217 Fix Home Assistant command topics for multi endpoint climate devices
  • #9599 ZM350STW1TCF doesn't support color temp startup
  • #3325 Fix state for Javis JS-SLK2-ZB
  • Fix startup blocked by onEvent handlers
  • #1010 Fix colortemp range for Philips 8719514301542
  • #3353 Fix warning mode for Bitron AV2010/24A
  • #9658 Fix properties missing when debounce is used under some conditions
  • #9723 Allow setting boost_time greater than 100 via Home Assistant
  • #3384 Fix power_outage_memory for Xiaomi QBKG40LM and QBKG41LM
  • #3389 Fix QBKG40LM operation mode
  • #9779 Fix no color support for Miboxer FUT038Z
  • #9797 Fix power measurements not working for some TS011F_plug
  • #9803 Fix typos in settings shema
  • #9646 Fix endpoint missing from state for 545D6102
  • #3412 Fix valve_position over reported by a factor of 10 for TS0601_thermostat_1
  • #9519 Send only 1 MQTT message when last_seen is enabled and Zigbee message is received
  • #9843 Fix synced color temperature out of range when setting color
  • #9218 Fix unsupported device error logs on interactions with group entities
  • #9822 Fix "Possible EventEmitter memory leak detected. 1001 drain listeners added to [Socket]" warning
  • #9898 Fix ICZB-RM11S battery percentage divided by 2
  • #3429 Fix device power source when device has backup battery
  • #7158 Fix not all actions being available for TuYa TS004F

New supported devices

This release adds support for 71 devices:

  • 046677803087 Philips Hue White ambiance Cher ceiling light
  • 07502L Immax 4 in 1 multi sensor
  • 1740193P0 Philips Hue Lucca wall light
  • 1741730V7 Philips Hue Lily outdoor spot light
  • 1742330P7 Philips Hue Calla outdoor
  • 1746547P7 Philips Hue White and color ambiance Daylo outdoor wall lamp
  • 1746730V7 Philips Hue Lily outdoor spot light
  • 2CH-ZG-BOX-RELAY Envilar 2 channel box relay
  • 368308_2010 Lidl Silvercrest rdiator valve with thermostat
  • 3RSP019BZ Third Reality Zigbee / BLE smart plug
  • 4080148P7 Philips Hue Signe table light
  • 4080148U9 Philips Hue White and color ambiance Signe table light
  • 4080248U9 Philips Hue White and color ambiance Signe floor light
  • 4090231P9 Philips Hue Liane
  • 4256050-ZHAC Centralite 3-Series smart dimming outlet
  • 5047131P8 Philips Hue White ambiance Buckram single spotlight
  • 5047230P6 Philips Hue White ambiance Buckram double spotlight
  • 73741_LIGHTIFY OSRAM LIGHTIFY RT5/6 LED
  • 7A-SS-ZABC-H0 Leedarson 4-in-1-Sensor
  • 81848 AduroSmart ERIA smart plug (with power measurements)
  • 8719514302235 Philips Hue White Filament Bulb E14
  • 8719514328242 Philips Hue white ambiance E27 800lm with Bluetooth
  • 8719514344723 Philips Akari downlight
  • 8719514392830 Philips Hue White Ambiance E27 filament screw globe
  • 8A-SS-BA-H0 Leedarson Motion Sensor
  • 9290024683 Philips Hue white ambiance A19 1100lm with Bluetooth
  • 9290024689 Philips Hue white and color ambiance B22 1100lm
  • 9290024717 Philips Hue white and color ambiance E26/A19 1600lm
  • 929002471901 Philips Hue white ambiance E27 1600lm with Bluetooth
  • 9290024785 Philips Hue White Ambinance G25 E26 Edison Filament Globe
  • 9290024896 Philips Hue white and color ambiance E27
  • 9290030211 Philips Hue white Candle bulb E14 bluetooth
  • 9290030509 Philips Hue smart plug - EU
  • 929003054301 Philips Hue White Ambiance Cher Pendant
  • 9290030675 Philips Hue motion sensor
  • 929003099101 Philips Hue white ambiance Aurelle rectangle panel light
  • AC201 OWON HVAC controller/IR blaster
  • CCB432 CASAIA Rail-Din relay and energy meter
  • DLKZMK12LM Xiaomi Aqara single switch module T1 (without neutral). Doesn't work as a router and doesn't support power meter
  • E1F-N9G Sengled Smart LED filament candle (E12)
  • FUT038Z Miboxer RGBW LED controller
  • GL-D-006P Gledopto Zigbee 6W anti-glare downlight RGB+CCT (pro)
  • GL-D-007P Gledopto Zigbee 12W anti-glare downlight RGB+CCT (pro)
  • HG06463B Lidl Livarno Lux E27 G95 filament bulb
  • HG07834A Lidl Livarno Lux GU10 spot RGB
  • HG07834B Lidl Livarno Lux E14 candle RGB
  • HG07834C Lidl Livarno Lux E27 bulb RGB
  • JR-ZDS01 Girier 1 gang mini switch
  • JS-MC-SENSOR-ZB JAVIS Microwave sensor
  • MCCGQ14LM Xiaomi Aqara E1 door & window contact sensor
  • PECMS01 Perenio Motion sensor
  • SLR1c Hive Heating thermostat
  • SLR2c Hive Dual channel heating and h...
Read more

1.22.0

01 Nov 16:40
Compare
Choose a tag to compare

Notes

  • The TypeScript refactor has been finished therefore Zigbee2MQTT is now fully written in TypeScript. This refactor brings some changes to the external extensions. The onMQTTConnected() and onZigbeeStarted() are replaced with start(), the onMQTTMessage() and onZigbeeEvent() methods are not called automatically anymore and require subscription through the eventbus (documentation).
  • With this release also comes the launch of the new site, created by psi-4ward. Make sure to check it out at zigbee2mqtt.io!

Features

  • #6281 The availability feature has been reimplemented. Adding more features, improving reliability and putting less stress on the network. Old configurations will still work (advanced.availability_timeout) but it is recommended to update your configuration.yaml. (documentation)
  • #9056 Allow to create and recall scenes in the frontend
    image
  • #9110 Allow to manage device options in frontend

Screenshot 2021-10-23 at 10 53 51

Improvements

  • #3109 Adds OTA support for Develco EMIZB-132
  • #3112 Support minimum_on_level for ubisys D1 / D1-R
  • #3121 Expose battery_low for NAS-PD07
  • #8956 Stop Zigbee2MQTT with error when initial MQTT connect fails
  • #3119 Add firmware version reporting for Develco EMIZB-132 and SMSZB-120
  • #3083 Adding pin code programming, presenting action and auto relock for easyCodeTouch_v1
  • #8287 Home Assistant: discover last_seen sensor when enabled
  • #3068 Improve TuYa device interviewing stability
  • #926 Allow publishing to device by endpoint ID
  • #3158 Expose temperature for Xiaomi SJCGQ11LM
  • #3164 Improve support for Busch-Jaeger 6735/6736/6737
  • #3166 Support mode_switch for Xiaomi QBKG39LM, QBKG38LM and QBKG25LM
  • #9214 Expose device and group configuration_url to Home Assistant
  • #9147 Woox R7049 support smoke test
  • #9312 Add support for unit of measurement to HA number entities
  • #3227 Add operation mode for YSR-MINI-Z
  • #3222 Expose illuminance_above_threshold and add illuminance_below_threshold_check for IKEA E1525/E1745
  • #3241 Expose 2 endpoints for OSRAM 4062172044776

Fixes

  • #3066 Fix EMIZB-132 divisor
  • #7423 Fix last seen not published when changed
  • #3107 Fix power monitoring for TuYa TS011F with manufacturer name _TZ3000_dpo1ysak
  • #8959 Fix external converters not loading
  • #3145 Fix incorrect battery percentage for some Yale locks
  • #8769 #8617 Fix Home Assistant template variable warnings
  • #9085 Fix Node.js 10 compatibility
  • #9133 Fix crash when converter throws exception
  • #3171 Fix incorrect naming for window_open_internal (closing -> closed)
  • #3176 Fix setpoint_change_source for Danfoss and Popp thermostats
  • #3122 Home Assistant fix discovery for covers only supporting tilt
  • #3086 Fix button 2, 3 and 4 not working for Sunricher SR-ZG9001K12-DIM-Z4
  • #3202 Fix power source for 3RWS18BZ
  • #3201 Fix running_state always null for Eurotronic thermostats
  • #9268 Fix Home Assistant discovery for select having numbers as options
  • #3218 Fix TRADFRI LED1624G9 not supporting color temperature
  • #9057 Fix power measurements for TS011F _TZ3000_cphmq0q7 wit appVersion 69
  • #3229 Fix value_min/max not correct for Home Assistant number when 0
  • #8349 Fix brightness command timing out for GL-SD-001

New supported devices

This release adds support for 75 new devices:

  • 3157100-E Centralite 3-Series pearl touch thermostat,
  • 322054 Lanesto Dimmable led driver
  • 3261348P6 Philips Hue white ambiance Still
  • 5060731P7 Philips Hue White & Color ambience Centris ceiling light (4 spots)
  • 5060931P7 Philips Hue White & Color Ambiance Centris ceiling light (3 spots)
  • 5110.40 Iluminize Zigbee 3.0 LED controller multi 5 - 4A,RGB W/CCT LED
  • 5112.80 Iluminize Zigbee 3.0 LED-controller 1x 8A
  • 5633031P9 Philips Hue White ambiance Pillar spotlight
  • 6109231C5 Philips Hue white ambiance Apogee square
  • 6109331C5 Philips Hue white ambiance Apogee round
  • 70049 Bega Zigbee control module DALI
  • 8719514301481 Philips Hue Filament Globe Ambiance E27
  • 8719514301542 Philips Hue Filament Globe XL Ambiance E27
  • 9134 LED Trading Powerstrip with 4 sockets and USB
  • 9290018217 Philips Hue white A60 bulb B22 bluetooth
  • 929002376301 Philips Hue Iris rose limited edition (generation 4)
  • 92900244777 Philips Hue White Ambiance E27 ST64 filament bulb
  • 9290024684 Philips Hue white ambiance E27 1100lm with Bluetooth
  • 929002469202 Philips Hue white A60 bulb E27 1050lm with Bluetooth
  • 929002471601 Philips Hue white and color ambiance E26/E27 1600lm
  • 929002477901 Philips Hue white filament Edison ST72 E27 LED warm-to-cool
  • 929002478401 Philips Hue white filament Edison ST19 E26 LED warm-to-cool
  • 929002966401 Philips Hue White & Color Ambiance Surimu square panel
  • 929002966501 Philips Hue White and Color Ambiance Surimu rectangle panel
  • 929003050601 Philips Hue smart plug
  • BSM-300ZB ShinaSystem SiHAS remote control
  • CSM-300ZB ShinaSystem SiHAS multipurpose sensor
  • DSM-300ZB ShinaSystem SiHAS contact sensor
  • EFEKTA_ePWS Custom devices (DiY) Plant wattering sensor with e-ink display
  • HK-DIM-A Candeo Zigbee LED dimmer smart switch
  • Icon Danfoss Icon floor heating (regulator, Zigbee module & thermostats)
  • KEYZB-110 Develco Keypad
  • KP-23EL-ZBS-ACE Climax Remote Keypad
  • LDSENK10 ADEO LEXMAN motion sensor
  • LED1949C5 IKEA TRADFRI LED bulb E14 470 lumen, wireless dimmable white spectrum/chandelier opal white
  • MIR-HE200-TY TuYa Human presence sensor
  • MSM-300ZB ShinaSystem SiHAS remote control 4 button
  • NCZ-3010 Nyce Door hinge sensor
  • PECLS01 Perenio Flood alarm device
  • PECWS01 Perenio Door sensor
  • QBKG19LM Xiaomi Aqara smart wall switch T1 (with neutral, single rocker)
  • QBKG20LM Xiaomi Aqara smart wall switch T1 (with neutral, double rocker)
  • QBKG34LM Xiaomi Aqara smart wall switch T1 (with neutral, three rocker)
  • ROB_200-025-0 ROBB Zigbee 8 button wall switch
  • S24013 The Light Group SLC SmartOne AC dimmer mini 200W Zigbee LN
  • S57003 The Light Group SLC SmartOne Zigbee wall remote 4-channels
  • SBM300Z1 ShinaSystem SiHAS IOT smart switch 1 gang
  • SBM300Z2 ShinaSystem SiHAS IOT smart switch 2 gang
  • SBM300Z3 ShinaSystem SiHAS IOT smart switch 3 gang
  • SBM300Z4 ShinaSystem SiHAS IOT smart switch 4 gang
  • SBM300Z5 ShinaSystem SiHAS IOT smart switch 5 gang
  • SBM300Z6 ShinaSystem SiHAS IOT smart switch 6 gang
  • SBM300ZB1 ShinaSystem SiHAS remote control
  • SBM300ZB2 ShinaSystem SiHAS remote control 2 button
  • SBM300ZB3 ShinaSystem SiHAS remote control 3 button
  • SMART-HEAT10 Alecto Radiator valve with thermostat
  • TS0001_switch_module TuYa 1 gang switch module
  • TS0002_switch_module TuYa 2 gang switch module
  • TS0003_switch_module TuYa 3 gang switch module
  • TS0004_switch_module TuYa 4 gang switch module
  • TS0111_valve TuYa Smart water/gas valve
  • TS011F_plug_1 TuYa Smart plug (with power monitoring)
  • TS011F_plug_3 TuYa Smart plug (with power monitoring by polling)
  • TS0601_motion_sensor TuYa Human presence sensor AIR
  • TS0601_rcbo TuYa DIN mount RCBO with smart energy metering
  • TS0601_thermostat_1 TuYa Thermostatic radiator valve
  • TS1101_dimmer_module TuYa 2CH Zigbee dimmer module
  • TSM-300ZB ShinaSystem SiHAS temperature/humidity sensor
  • TV01-ZB Moes Thermostat radiator valve
  • USM-300ZB ShinaSystem SiHAS multipurpose sensor
  • WDE002386 Schneider Electric Push button dimmer
  • WDE002906 Schneider Electric Wiser wireless switch 1-gang
  • YRL226 TS Yale Assure lock SL
  • YSR-MINI-Z TuYa 2 in 1 dimming remote control and scene control
  • ZTS-EU_4gang Moes Wall touch light switch (4 gang)

1.21.2

01 Oct 15:59
Compare
Choose a tag to compare

Notes

  • Because of #8604 this release requires at least Home Assistant 2021.9.0

Improvements

  • #8640 Home Assistant discover number selection entities for numeric values supporting set
  • #2980 Separately identify green power devices
  • #2979 Namron 4512726 expose move_to_hue action
  • #2991 Support battery percentage from some TuYa TS0203 sensors
  • #2998 Expose battery for ZS1100400-IN-V1A02
  • #8585 Read bulb state, brightness and colour on scene recall command
  • #3005 Recognise CR Smart Home TS0207 as TuYa device
  • #8712 Add multi endpoint support for Home Assistant cover
  • #2960 Expose device_temperature for Xiaomi SP-EUC01
  • #2933 Expose reliability and fault for Develco HESZB-120 and SMSZB-120
  • #3021 Legrand 067771 expose lighting ballast configuration
  • #3024 Add pin code functionality for Schlage BE468
  • #3041 Moes ZTS-EU respond to time requests
  • #3043 Add thermostat_unit option
  • #3070 Support led_disabled_night and temperature for QBKG25LM
  • #3091 Support power_outage_memory for Xiaomi SSM-U02

Fixes

  • #2988 Fix warning not working correctly for Bitron AV2010/29A
  • #8604 Home Assistant remove deprecated last_reset_topic and change state_class to total_increasing for energy
  • #3008 Fix inaccurate battery percentage for 3RWS18BZ
  • #3019 Fix powersource undefined for Dawon DNS PM-S250-ZB, PM-S150-ZB and PM-S350-ZB
  • #3004 Fix brightness for Mercator ikuü SSWD01
  • #3057 Fix running_state missing for BAC-002-ALZB
  • #3055 Swap left and right for Eco-Dim.05
  • #3079 Fix red color for TS0503A
  • #2663 Fix Home Assistant discovery for covers only supporting tilt

New supported devices

This release adds support for 49 devices:

  • 1745430P7 Philips Hue Impress outdoor Pedestal
  • 1746630P7 Philips Hue White and Colour Ambiance Amarant linear outdoor light
  • 3200-de Centralite Smart outlet
  • 3200-fr Centralite Smart outlet
  • 33955 Eglo LED light with color temperature
  • 3RDS17BZ Third Reality Door sensor
  • 3RMS16BZ Third Reality Wireless motion sensor
  • 4058075208360 LEDVANCE SMART+ outdoor flex multicolor
  • 4137 Paulmann Smart Home Zigbee LED bulb 9,3W Matt E27 RGBW
  • 43094 Enbrighten Zigbee in-wall smart switch ZB4102
  • 501.31 Paulmann Smart plug for Euro- and Schuko-sockets
  • 50208693 Sunricher Zigbee wall remote control for RGBW, 1 zone with 2 scenes
  • 701721 Popp Smart thermostat
  • 9290020400 Philips Hue White E17 470 lumen
  • 9290022266A Philips Hue White and color ambiance A19 800 lumen
  • 9290022267A Philips Hue white ambiance E27 with Bluetooth
  • AV2010/14 SMaBiT (Bitron Video) Curtain motion detector
  • AV2010/16 SMaBiT (Bitron Video) Wall-mount relay with dimmer
  • AV2010/18 SMaBiT (Bitron Video) Wall-mount relay
  • AV2010/21B SMaBiT (Bitron Video) Magnetic contact sensor with additional input for wired sensors
  • AV2010/22B SMaBiT (Bitron Video) Outdoor motion detector
  • AV2010/33 SMaBiT (Bitron Video) Vibration sensor
  • AV2010/37 SMaBiT (Bitron Video) Water detector with siren
  • DLKZMK11LM Xiaomi Aqara single switch module T1 (with neutral)
  • E2007 IKEA STARKVIND air purifier
  • EFEKTA_THP_LR Custom devices (DiY) DIY outdoor long-range sensor for temperature, humidity and atmospheric pressure
  • GD-ZCRGB012 GIDERWEL Smart Zigbee RGB LED strip controller
  • GL-G-002P Gledopto Zigbee 7W garden lamp RGB+CCT (pro)
  • HG06619 Lidl Silvercrest oudoor plug
  • HS2DB HEIMAN Smart doorbell button
  • LCZ030 TuYa Temperature & humidity & illuminance sensor with display
  • LED1934G3_E27 IKEA TRADFRI LED bulb E27 WW clear 250 lumen, dimmable
  • LED1937T5_E27 IKEA TRADFRI LED bulb E27 470 lumen, dimmable, opal white
  • LED2002G5 IKEA TRADFRI LED bulb E14 470 lumen, dimmable, white spectrum, clear
  • LED2003G10 IKEA TRADFRI LED bulb E27 1055 lumen, dimmable, white spectrum, opal white
  • LED2005R5 IKEA TRADFRI LED bulb GU10 345 lumen, dimmable, white spectrum
  • MS-108ZR Moes Zigbee + RF curtain switch module
  • NAS-PD07 Neo Motion, temperature & humidity sensor
  • PS-SPRZMS-SLP3 PLAID SYSTEMS Spruce temperature and moisture sensor
  • S26R2ZB SONOFF Zigbee smart plug
  • SCCV2401-1 iStar Zigbee 3.0 LED controller, dimmable white 12-36V DC max. 5A
  • SIN-4-1-20 NodOn Single LED relay
  • SIN-4-2-20 NodOn Double LED relay
  • TS0207_water_leak_detector TuYa Water leak detector
  • YDD-D4F0-TSDB Yale Lockwood T-Lock
  • YDF40 Yale Real living lock / Intelligent biometric digital lock
  • ZNDDMK11LM Xiaomi Aqara smart lightstrip driver
  • ZNXNKG02LM Xiaomi Aqara knob H1 (wireless)
  • ZS130000078 Linkind Security keypad battery

1.21.1

01 Sep 16:13
Compare
Choose a tag to compare

Improvements

  • #2881 Tint 404011 remote: add direction of color temp changes
  • #2886 Xiaomi Aqara ZNCZ15LM add overload_protection
  • #2866 Improve support for Hive thermostats and receivers
  • #2890 Add external_measured_room_sensor for Danfoss 014G2461 and Hive UK7004240
  • #2891 Expose calibration_time for QS-Zigbee-C01, 11830304 and TS130F cover
  • #2896 Expose minimum_brightness, led_intensity_on and led_intensity_off for Sinope DM2500ZB
  • #2897 Update Ubisys J1 default bindings
  • #2895 Expose alarm for Climax SRAC-23B-ZBSR
  • #8399 Add Home Assistant device classes for air quality sensors
  • #2921 Expose power_on_behavior for MOES MS-104Z
  • #8408 Add color temperature range for YSR-MINI-01_rgbcct
  • #2939 Explicitly specify the exposes for Schneider Wiser 4bth switch
  • #6281 Add availability_mode all for Home Assistant discovery.
  • #8458 Expose energy for Bitron Video AV2010/25
  • #2941 Add electricity measurements for CCT711119
  • #8457 Increase accuracy of Develco AQSZB-110 battery % measurements
  • #2943 Expose alarm for HESZB-120
  • #8509 Expose alert_behaviour and battery for Linkind ZS130000178
  • #2956 Add color temperature range for AB32840
  • #2957 Update max color temperature range for ZB-RGBCW
  • #2966 Emulate running state for Danfoss Ally thermostat
  • #2974 Correct manufacturers for Xfinity security keypads
  • #2967 Improve handling of keypad alarm arming, check your alarm documentation for updated procedure

Fixes

  • #8222 Fix start failing when npm start is executed outside Zigbee2MQTT directory
  • #8226 Fix TuYa TS0203 door sensor not recognised
  • #2867 Remove running_state from RC-2000WH
  • #8235 Fix start warning/alarm not working for some devices
  • #2876 PTVO firmware: fix write command not working for endpoints 10-16
  • #2874 Fix white channel not controllable for GL-C-007S
  • #8266 Fix removing device from blocklist in frontend not working
  • #8292 Fix No converter available for 'transition' (10) when controlling Ubisys D1 with transition.
  • #2838 Fix Yookee D10110 support
  • #8027 Fix unable to control AduroSmart 81813 and being recognized as Trust ZLED-TUNE9
  • #8027 Fix ZLED-RGB9 being recgonized as ZLED-TUNE9
  • #7903 Fix Home Assistant discovery for Hive SLR2(b)
  • #8243 Fix powerSource for 53170161, E11-G13 and E11-N1EA
  • #7604 Fix Gledopto GL-SD-001 marked as unsupported
  • #8331 Fix TuYa TS0216 siren interview failing
  • #408 Fix Unhandled promise rejection for TS0041, TS0042 and TS0043
  • #2916 Disable OTA for Philips 929003017102 since we don't have images
  • #864 Change ZGRC-KEY-013 to SR-ZG9001K12-DIM-Z4 and fix description
  • #8310 Fix warning not working correctly for SIRZB-110 and SRAC-23B-ZBSR
  • #8448 Fix empty state published for debounce when using filtering
  • #6861 Fix energy reporting for SP-EUC01 and remove temperature, voltage and current because device doesn't support it.
  • #8488 Remove battery_low and tamper from AC01353010G since it does not support it
  • #746 Fix device missing from frontend after rejoining
  • #8410 Fix build (npm run build) failing on Windows
  • #2955 Remove non-working battery reporting for SAGE206611
  • #8530 Fix EPERM: operation not permitted, rename database.db.tmp on Windows
  • #8535 Fix multiple Touchlink commands to Ikea TRADFRI devices not working

New supported devices

This release adds support for 51 devices:

  • 3310-G Centralite Temperature and humidity sensor
  • 3435731P7 Philips Hue Adore white ambiance bathroom mirror
  • 3802967 Namron Led bulb 6w RGBW
  • 4076131P6 Philips Hue white ambiance suspension Cher with bluetooth 3000lm
  • 4523430 ELKO ESH Plus Super TR RF PH
  • 5063130P7 Philips Hue Bluetooth white & color ambiance spot Fugato black (1 spots)
  • 5063131P7 Philips Hue Bluetooth white & color ambiance spot Fugato white (1 spots)
  • 511.541 Iluminize Zigbee 3.0 wall dimmer RGBW 1 zone
  • 5111531H5 Philips Garnea downlight
  • 5309030P9 Philips Hue White ambiance Runner single spotlight
  • 5412748727401 Prolight GU10 white and colour spot
  • 9290019532 Philips Hue White and color ambiance GU10 spot LED with Bluetooth
  • 929002376501 Philips Hue Bloom Gen4 with Bluetooth (White) - US
  • 9290024687 Philips Hue White and Color Ambiance A19 1100 lumen
  • 9CZA-P470T-A1A ADEO ENKI LEXMAN E14 LED RGBW
  • AJ_ZIGPROA60 Ajax Online Smart Zigbee pro 12W A60 bulb
  • DG15S-1BW Leviton Decora smart Zigbee 3.0 certified 15A switch
  • E21-N13A Sengled Smart LED (A19)
  • FUT035Z Miboxer Dual white LED controller
  • FUT036Z Miboxer Single color LED controller
  • GW01 Keen Home Signal repeater
  • GZCGQ11LM Xiaomi Aqara T1 light intensity sensor
  • HBR2917E Datek Eva scene selector
  • HG06462A Lidl Livarno Lux E27 A60 filament bulb
  • HLC610 iLightsIn 1-10V dimming LED controller
  • HSE2919E Datek Eva water leak sensor
  • KEYPAD001 Hive Alarm security keypad
  • KN-Z-WH1-B04 LUX KONOz thermostat
  • LDSENK02F ADEO 10A/16A EU smart plug
  • LH-09521 iHORN Indoor siren
  • LS21001 Linkind Water leak sensor
  • MCCGQ12LM Xiaomi Aqara T1 door & window contact sensor
  • PF-PM02D-TYZ IOTPerfect Smart water/gas valve
  • QBCZ14LM Xiaomi Aqara smart wall outlet T1
  • QBCZ15LM Xiaomi Aqara smart wall outlet H1 usb
  • QBKG31LM Xiaomi Aqara smart wall switch H1 Pro (with neutral, double rocker)
  • QBKG38LM Xiaomi Aqara E1 1 gang switch (without neutral)
  • RCL 240 T Innr Smart round ceiling lamp comfort
  • ROB_200-017-0 ROBB Zigbee smart plug
  • RS-THP-MP-1.0 Keen Home Temperature Sensor
  • S4RX-110 Onesti Products AS Relax smart plug
  • SIRZB-110 Develco Products A/S Customizable siren
  • SLR1 Hive Heating thermostat
  • TS011F_din_smart_relay TuYa Din smart relay (with power monitoring)
  • TS0601_water_sensor TuYa Water leak sensor
  • WS-EUK03 Xiaomi Aqara smart wall switch H1 EU (with neutral, single rocker)
  • WS-EUK04 Xiaomi Aqara smart wall switch H1 EU (with neutral, double rocker)
  • X706U Lerlink Zigbee dimmer switch
  • ZL100010008 Linkind Zigbee LED 9W 2700K A19 bulb, dimmable
  • ZLED-RGB9 Trust Smart RGB LED bulb
  • ZNJLBL01LM Xiaomi Aqara roller shade companion E1

1.21.0

01 Aug 18:47
Compare
Choose a tag to compare

Notes

  • Because of #7980 this release requires at least Home Assistant 2021.7.0
  • This release fixes an issue in the backup/restore mechanism (#7680) which prevented devices to join via a router after reflashing the firmware of your adapter. Since this was caused by an incomplete backup, users who already reflashed their coordinators earlier have to repair the routers where joninig is not working for. This only applies to adapters with a Z-Stack_3.x.0 (e.g. zzh, CC2652R launchpad, Slaesh's) firmware. Important: before reflashing your adapter, make sure to start and stop this release at least once! This ensures your backup (coordinator_backup.json) is correct.
  • New firmwares are available for Texas Instruments CC2652R, CC2652RB, CC1352P-2 based adapters: 20210708 (changelog). This i.a. enables control for the LEDs (will be on when joining is permitted) and fixes an issue of devices not being able to join when joining is only enabled on a specific router. Important: before reflashing first read the point above.
  • Over time the Zigbee2MQTT codebase will be migrated to TypeScript (#8074). By switching to TypeScript the Zigbee2MQTT codebase will be better maintainable. Since Node.js cannot run TypeScript natively a compilation step is required. Zigbee2MQTT will automatically handle this part upon initial start and after updating (you will see Building Zigbee2MQTT... in the log). No action from users is required.

Features

  • #395 Support migration from CC2531/CC2530 on 1.2 firmware to CC2652/CC1352/CC2538 without repairing all devices

Improvements

  • #8187 Add support for Home Assistant energy statistics
  • #7359 Update to new Home Assistant MQTT Fan discovery
  • #7931 Enable color via hue/saturation for Gledopto devices
  • #2760 Add battery voltage support for 3RSS009Z
  • Prefer external converter definitions of zigbee-herdsman-converters definitions.
  • #7980 Discover enum exposes as select entities in Home Assistant
  • #2780 Add color temperature range for Philips Hue 9290022943
  • #8032 Discover color temperature range for Home Assistant groups
  • #2835 Add more functionallity for Develco SMSZB-120
  • #7553 Increase reliability of TuYa end device interviewing
  • #2839 Support color temperature for Ikea LED1937T5
  • #2845 Add toggle action for Legrand 067774
  • #8190 Add pincode configuration functionality for all Yale locks

Fixes

  • #2750 SMSZB-120: add OTA and expose firmware version
  • #2756 Set colorTempRange for A9A19A60WESDZ02 and A9BR3065WESDZ02
  • #7918 Fix Home Assistant group discovery collision between different Zigbee2MQTT instances.
  • #2735 Fix and expose Xiaomi operation_mode controls
  • #7432 Fix last_seen not always updated
  • #2784 Fix no hue_stop after hue_move and add action_rate
  • #8030 Expose manufacturer in frontend
  • #8062 Fix power source for STS-IRM-251 and STS-WTR-250
  • #392 Fix socket handling with Deconz adapter
  • #2818 Livolo dimmer and switch bug fixes
  • #7762 Fix not able to join device via router after a reflash of the adapter (restore of backup) (only applies to adapter on ZStack 3.x.0 or 3.0.x firmware)
  • #7921 Fix SmartThings multipurpose sensor IM6001-MPP01 reporting every few seconds
  • #2828 Separate SRSC-M01 from ZNCLDJ11LM
  • #6897 Fix Heiman HS2IRC no response
  • #2814 Fix some cacheable not being cached
  • #8137 Fix .flat is not a function error.
  • #8144 Fix configure failing for some TH1123ZB devices
  • #693 Fix non-existing devices returned from group members
  • #8149 Fix delay on second button click for TuYa TS0041 TS0042 TS0043 TS0044
  • #2851 Fix hue_power_on_color
  • #8130 Reduce Niko 170-33505 reporting interval
  • #2854 Fix QBKG25LM configure failing

New supported devices

This release adds support for 54 devices:

  • 1740293P0 Philips Hue Lucca Pedestal
  • 3328-G Centralite 3-Series micro motion sensor
  • 3417831P6 Philips Hue white ambiance Adore spotlight with Bluetooth (1 spot)
  • 3417831P6 Philips Hue white ambiance Adore spotlight with Bluetooth (1 spot)
  • 3418331P6 Philips Hue white ambiance Adore bathroom mirror light
  • 3418931P6 Philips Hue white ambiance Struana bathroom ceiling with bluetooth 2400lm
  • 5047430P6 Philips Hue White ambiance Buckram quadruple spotlight
  • 5060830P7 Philips Hue White & Color ambience Centris ceiling light (3 spots)
  • 5063230P7 Philips Hue Bluetooth white & color ambiance spot Fugato black (2 spots)
  • 5063330P7 Philips Hue Bluetooth white & color ambiance spot Fugato black (3 spots)
  • 5063430P7 Philips Hue Bluetooth White & Color Ambiance spot Fugato black (4 spots)
  • 5309230P6 Philips Hue White ambiance Runner double spotlight
  • 5309331P6 Philips Hue White ambiance Runner triple spotlight
  • 5633030P6 Philips Hue White ambiance Pillar spotlamp
  • 73889 OSRAM Smart home soft white PAR38 outdoor bulb
  • 74388 Sylvania Smart+ contact and temperature sensor
  • CM001 LELLKI Circuit switch
  • CTHS-317-ET CASAIA Remote temperature probe on cable
  • DG15A-1BW Leviton Indoor Decora smart Zigbee 3.0 certified plug-in outlet
  • DIYRuZ_Zintercom DIYRuZ Matrix intercom auto opener
  • E13-N11 Sengled Flood light with motion sensor light outdoor
  • EFEKTA_PWS Custom devices (DiY) [Plant Wattering Sensor]
  • Eco-Dim.05 EcoDim LED dimmer duo 2x 0-100W
  • FUT039Z Miboxer RGB+CCT LED controller
  • GL-SD-001 Gledopto Zigbee triac AC dimmer
  • HC-SLM-1 Home Control AS Heimgard (Wattle) door lock pro
  • HG06463A Lidl Livarno Lux E27 ST64 filament bulb
  • ID-UK21FW09 Iolloi Zigbee LED smart dimmer switch
  • JZ-ZB-001 LELLKI Smart plug (without power monitoring)
  • JZ-ZB-002 LELLKI 2 gang touch switch
  • JZ-ZB-003 LELLKI 3 gang switch
  • LED1936G5 IKEA TRADFRI LED globe-bulb E27 470 lumen, dimmable, white spectrum, opal white
  • MS-105B Moes Smart dimmer module (2 gang)
  • MS-105Z Moes 1 gang 2 way Zigbee dimmer switch
  • QBKG40LM Xiaomi Aqara E1 1 gang switch (with neutral)
  • QBKG41LM Xiaomi Aqara E1 2 gang switch (with neutral)
  • S-LUX-ZB TuYa Light sensor
  • SM0201 Tuya Temperature & humidity sensor with LED screen
  • VOCKQJK11LM Xiaomi Aqara TVOC air quality monitor
  • WL4200S Sinope Zigbee smart water leak detector
  • WS-EUK01 Xiaomi Aqara smart wall switch H1 EU (no neutral, single rocker)
  • WS-EUK02 Xiaomi Aqara smart wall switch H1 EU (no neutral, double rocker)
  • WXKG13LM Xiaomi Aqara T1 wireless mini switch
  • XHK1-TC Xfinity Alarm security keypad
  • ZB-5001 RGB Genie Zigbee 3.0 remote control
  • ZB-5122 RGB Genie Micro remote and color dimmer with single scene recall
  • ZG302-BOX-RELAY Envilar Zigbee AC in wall switch
  • ZLD-RCW Moes RGB+CCT Zigbee LED Controller
  • ZNCZ11LM Xiaomi Aqara power plug ZigBee
  • ZNCZ15LM Xiaomi Aqara T1 power plug ZigBee
  • ZS230002 Linkind 5-key smart bulb dimmer switch light remote control
  • ZVG1 RTX Zigbee smart water valve
  • ZeeFlora Custom devices (DiY) Flower sensor with rechargeable battery
  • easyCodeTouch_v1 Onesti Products AS Zigbee module for EasyAccess code touch series

1.20.0

01 Jul 17:18
Compare
Choose a tag to compare

Features

  • #2410 Home Assistant groups discovery for lights, switches, covers and locks

Improvements

  • #2681 Expose lock pincode and allow to set user enabled and type
  • #7760 Home Assistant: expose binary with SET access as switch
  • #7677 Add Home Assistant sensor state_class support
  • #2651 Expose cover state as enum (OPEN, CLOSE and STOP) instead of binary (OPEN and CLOSE)
  • #7684 Disable less common Home Assistant entities by default
  • #2657 Develco AQSZB-110 expose air_quality
  • Disable legacy options on new network start
  • #7683 Deprecate Home Assistant entity attributes (homeassistant_legacy_entity_attributes option) (documentation)
  • #7725 Log and publish friendly_name on deviceLeave
  • #2673 Expose illuminance Bosch RADON TriTech ZB
  • #2674 Improve TS0505A_led and TYZS1L led control
  • #7854 Combine published state of /set command into one message
  • #2727 Add power monitoring feature to SP2600ZB
  • #2734 Power reporting for Aqara QBKG26LM
  • #2738 Add running_state reporting to Sinope thermostat
  • #2732 Support 2-gang mode for LK Fuga wireless battery switch (550D6001)

Fixes

  • #2644 AXIS GR-ZB01-W fix position not set sometimes
  • #2645 Disable color temperature startup support for some OSRAM bulbs which do not support it
  • #2655 CCTFR6700 Fix Hass complaining about invalid values
  • #7693 Fix SRSP - UTIL - ledControl after 6000ms for CC2538 and CC2530 adapter when permitting join
  • #2667 Drop tamper expose for some HEIMANN devices which do not support it
  • #2668 Axis GR-ZB01-W battery accuracy
  • #7785 Fix "Cannot read property 'group' of null" exception on "request/group/members/remove_all"
  • #2694 Add missing toggle for Legrand 067773
  • #7848 Disable unsupported color_temp_startup for YSR-MINI-01_rgbcct and YSR-MINI-01_wwcw
  • #7736 Fix non supported color_mode and color properties being published for group members
  • #2722 Fix power icon for Xiaomi SSM-U01
  • #1986 QBKG25LM and QBKG26LM not reporting actions when in decoupled mode.
  • #3997 Fix Salus OTA updates not working
  • #7895 Mark TS0216 as EndDevice
  • #2739 Datek HSE2905E fix energy being 0 and support B and C phase
  • #2745 Fix Image is truncated for some OTA updates
  • #2744 Correct Ikea E2001/E2002 exposed actions

New supported devices

This release adds support for 36 devices

  • 1742830P7 Philips Hue Lily outdoor spot light
  • 3261331P6 Philips Hue white ambiance Still
  • 3RSS009Z Third Reality Smart switch Gen3
  • 3RWS18BZ Third Reality Water sensor
  • 4090130P9 Philips Hue Sana
  • 4090631P9 Philips Hue Flourish white and color ambiance pendant light
  • 41EPBDWCLMZ/354PBDMBTZ Schneider Electric Wiser 40/300-Series Module Dimmer
  • 4512726 Namron Zigbee 4 in 1 dimmer
  • 511.050 Iluminize Zigbee 3.0 LED controller for 5in1 RGB+CCT LEDs
  • 5120.1110 Iluminize ZigBee 3.0 Dimm-Aktor mini 1x 230V
  • 545D6102 Schneider Electric LK FUGA wiser wireless dimmer
  • 550D6001 Schneider Electric LK FUGA wiser wireless battery 4 button switch
  • 552-80401 Niko Wireless motion sensor
  • 929002422801 Philips Hue Play gradient lightstrip 65
  • 9CZA-A806ST-Q1Z ADEO ENKI Lexman E27 LED white
  • AC26940 LEDVANCE Smart Zigbee outdoor plug
  • BRT-100-TRV Moes Thermostatic radiator valve
  • CCT711119 Schneider Electric Wiser smart plug
  • CP180335E-01 Current Products Corp Gen. 2 hybrid E-Wand
  • E11-N1G Sengled Vintage LED edison bulb (ST19)
  • E1C-NB7 Sengled Smart plug with energy tracker
  • E21-N1EA Sengled Sengled smart LED multicolor A19 bulb
  • HV-CE14CXZB6 Hive Active light, warm to cool white (E14)
  • ITCMDR_Click IT Commander Button
  • ITCMDR_Contact IT Commander Contact Sensor
  • LED1934G3 IKEA TRADFRI LED bulb E27 WW clear 250 lumen, dimmable
  • LED1937T5 IKEA TRADFRI LED bulb E27 470 lumen, dimmable, opal white
  • LXN56-SS27LX1.1 Zemismart Smart light switch - 2 gang with neutral wire
  • PSBZS A1 Lidl Parkside smart watering timer
  • QBKG39LM Xiaomi Aqara E1 2 gang switch (without neutral)
  • R7049 Woox Smart smoke alarm
  • S520530W Schneider Electric Odace connectable relay switch 10A
  • TS011F_circuit_breaker TuYa Circuit breaker
  • TS011F_plug_2 TuYa Smart plug (without power monitoring)
  • TS0502B TuYa Light controller
  • WL-SD001-9W Nue / 3A 9W RGB LED downlight

1.19.1

04 Jun 09:30
Compare
Choose a tag to compare

Fixes

  • #7662 Fix Docker container not starting on Raspberry Pi

1.19.0

01 Jun 15:56
Compare
Choose a tag to compare

Notes

  • Home Assistant addon users who don't see the update and are still on 1.18.1, make sure to switch to the new repo
  • The commissioning and backup procedure has heavily been refactored. Backups of Texas Instruments Zigbee 3.0 coordinator are now stored in the zigpy/open-coordinator-backup format. The backup/restore procedure also has been improved. It's now possible to switch between Texas Instruments Zigbee 3.0 coordinator without reflashing it (e.g. CC2538 -> CC2652). WARNING: once you start a new network or restore one on this release it will not be possible to downgrade to earlier Zigbee2MQTT versions. If you already have a network on Zigbee2MQTT < 1.19.0 and you upgrade to this release, it is possible to downgrade to earlier versions of Zigbee2MQTT.

Improvements

  • #7571 Add filtered_optimistic device option (documentation)
  • #2441 Improve color sync functionality and allow to disable
  • #7455 Add skip_disable_reporting to unbind group/remove
  • #303 Fix extended pan ID not being set correctly
  • Turn on adapter LED when joining is enabled
  • #2532 Remove configureKey
  • Home Assistant: don't publish mocked values anymore replaced by unknown state in #7032
  • #2540 Added default beep values for STS-PRS-251 expose
  • #7298 Make Node.js 16 supported
  • #2550 Adds ballast config CCT5010-0001
  • #42 Add OTA for Lupus LS12128
  • #2582 Fix EcoDim ED-10011 actions
  • #2592 Improve Danfoss 014G2461 and Hive UK7004240 support
  • #2634 New features for ID LOCK 150
  • #2631 Make TS0216 turn on at volume 0 instead of 10

Fixes

  • #7571 Honour optimistic false for groups
  • #2541 Fix unknown power source for LXN59-2S7LX1.0
  • #7292 Recognise LXT56-LS27LX1.7 as 3A12S-15
  • #7290 Xiaomi SJCGQ11LM remove tamper
  • #7326 Fix device not removed from group in configuration.yaml upon device removal
  • #7330 Correct unknown powerSource for lights supporting only brightness
  • #7220 Fix color_mode missing for lights with multiple endpoints.
  • #449 Can't set Settings > Serial > adapter to null
  • #2564 Fix EcoDim ED-10011 actions
  • #7426 Fix json schema default values and examples
  • #2565 Fix fan modes for 99432
  • #2569 OSRAM CLA60 RGBW Z3 does not support startupColorTemp
  • #2552 Fix Ubisys C4 UNSUPPORTED_ATTRIBUTE on writing configure_device_setup
  • #2565 Xiaomi DJT11LM expose action angle
  • #2577 Updated reporting defaults for Develco devices
  • #7470 Fix controlling heat endpoint with occupied_heating_setpoint_heat not working
  • #2584 SG-V100-ZB does not support battery voltage reporting
  • #2603 Remove SEA801-Zigbee/SEA802-Zigbee running_state since it doesn't support it
  • #2609 Fix TS0210 vibration not reset to false
  • #2596 Remove voltage expose of SG-V100-ZB
  • #7567 Fix commandProgrammingEventNotification missing pin
  • #2626 Fix InstaRemote action exposes
  • #2463 Fix Yookee D10110 received position inverted
  • #7603 Fix outdated network address shown in frontend
  • #7603 Show network address as hex in graphviz and plantuml network map

New supported devices

This release adds support for 49 new devices:

  • 0140302 Idinio Zigbee LED foot dimmer
  • 1742030P7 Philips Hue Calla outdoor
  • 1745530P7 Philips Hue Nyro
  • 4090330P9 Philips Hue Ensis
  • 9290022943 Philips Hue white E12
  • 929002376401 Philips Hue Iris gold limited edition (generation 4)
  • 929002376701 Philips Hue Iris silver limited edition (generation 4)
  • AQSZB-110 Develco Air quality sensor
  • AV2010/21C SMaBiT Ultra-flat magnetic contact sensor
  • CCT5011-0001/MEG5011-0001 Schneider Electric Micro module switch
  • CCTFR6400 Schneider Electric Temperature/Humidity measurement with thermostat interface
  • CCTFR6700 Schneider Electric Heating thermostat
  • DSZ01 J.XUAN Door or window contact switch
  • E1836 IKEA ASKVADER on/off switch
  • EER40030 Schneider Electric Zigbee smart plug with power meter
  • EER42000 Schneider Electric Zigbee load actuator with power meter
  • EER50000 Schneider Electric Wiser H-Relay (HACT)
  • EER51000 Schneider Electric Wiser thermostat (RTS)
  • EER53000 Schneider Electric Wiser radiator thermostat (VACT)
  • F-ADT-WTR-1 SmartThings ADT water leak detector
  • FLSZB-110 Develco Flood alarm device
  • HK-ZD-CCT-A Sunricher 50W Zigbee CCT LED driver (constant current)
  • HS1MS-EF HEIMAN Smart motion sensor
  • HS1MS-M HEIMAN Smart motion sensor
  • HSC1-WD-0 ROOME Door or window contact switch
  • LED1925G6 IKEA TRADFRI LED bulb E14 470 lumen, opal, dimmable, white spectrum, color spectrum
  • LED1935C3 IKEA TRADFRI LED bulb E14 WW clear 250 lumen, dimmable
  • OPL 130 C Innr Outdoor smart pedestal light colour
  • PRZ01 J.XUAN Human body movement sensor
  • R9077 Woox RGB+CCT LED
  • RC 110 Innr Innr RC 110 Remote Control
  • ROB_200-006-0 ROBB ZigBee LED dimmer
  • RSL 110 Innr Recessed spot light
  • SM323 Samotech ZigBee retrofit dimmer 250W
  • SPZ01 J.XUAN plug
  • TS004F TuYa Wireless switch with 4 buttons
  • TS011F_plug TuYa Smart plug
  • TS0601_air_quality_sensor Tuya Air quality sensor
  • TS0601_temperature_humidity_sensor Tuya Temperature & humidity sensor
  • WDE002334 Schneider Electric Rotary dimmer
  • WRS-R02 Xiaomi Aqara wireless remote switch H1 (double rocker)
  • WSZ01 J.XUAN Wireless switch
  • ZB-SW04 eWeLink Smart light switch - 4 gang
  • ZB006-X Fantem Smart dimmer module without neutral
  • ZNCJMB14LM Xiaomi Aqara S1 smart touch panel
  • ZSS-ZK-THL Moes Smart temperature and humidity meter with display
  • ZTS-EU_2gang Moes Wall touch light switch (2 gang)
  • 4090431P9 Philips Hue Flourish white and color ambiance table light with Bluetooth
  • XDD11LM Xiaomi Aqara Opple MX960

1.18.3

01 May 12:53
Compare
Choose a tag to compare

Notes

  • Home Assistant users: due to #7057 at least Home Assistant 2021.4.5 is required
  • The famous devices.js file has been removed. Due to the amount of supported devices this file became very big (17K+ lines) and was therefore barely loadable in e.g. the Github web editor. This file has been split per vendor. The How to support new devices guide has been rewritten to use external converters instead.

Improvements

  • #7064 Add log_symlink_current option to create symlink to current logs in log directory (documentation)
  • #6906 Add OTA update for some Xiaomi devices
  • #2455 Support power_outage_memory for Xiaomi ZNLDP12LM
  • #7127 Support binding of server clusters towards clients
  • #2501 Yale YRD226/246 TSDB support pincode management
  • #7057 Home Assistant: use color_mode for lights
  • #2509 Xiaomi SSM-U01 add switch_type and power_outage_memory
  • #2514 Added lock user status functions for YRD246 lock
  • #7242 Only attempt to configure end device when message is received from it

Fixes

  • #2442 Fix Fantem ZB003-X not reporting data
  • #2440 Fix Ubisys OTA not working for new OTA files
  • #2445 Fix Lidl bulb color capabilities
  • #2444 Fix color temp percent nog sticking to min/max range of bulb
  • #6713 Fix Tuya TS0121_plug not reporting power anymore after restart via frontend
  • #7011 Fix power source being Unknown for lights
  • #6987 Home Assistant fix template rendering warnings for dictionary missing attribute
  • #430 Fix device option set to null instead of removed when sending null
  • #2472 Fix Aqara D1 action expose data
  • #6905 Fix optimistic group state property not postfixed with endpoint name when necessary.
  • #6905 Fix state of group not changing when state of specific endpoint is changed
  • #7004 Fix high CPU usage with Deconz adapter
  • #7088 LED Driver TuYa TS0503B RGB UNSUPPORTED_ATTRIBUTE when try restore color
  • #2479 Fix Bitron 902010/29 exposes as smoke sensor (while it is only a siren)
  • #7038 Fix brightness state incorrect when brightness_step with transition is stopped with brightness_step 0
  • #2487 Correct get/set position for bticino 4027C
  • #7074 Home Assistant: fix device_automation not published when homeassistant is in device options
  • #2498 AU-A1VG125Z5E/19 turns off at brightness 1
  • #2485 Improve reliability of interview procedure
  • #7106 Fix brightness of light not restored correctly after restart when transition is used
  • #2503 Fix position being a string
  • #2507 SMSZB-120: added test, removed tamper
  • #7038 Fix state of all members except first incorrect when brightness_move is send to group
  • #7200 Force powerSource to battery for Ikea E1525/E1745
  • #2512 Fix controlling of TI0001-switch-2gang not working
  • #2518 Fix TuYa TS0013 and TS0014 reporting battery power source
  • #2517 Fix TuYa TS0013 and TS0014 automatically turning off after 2 minutes
  • #2519 Fix TuYa WHD02 reported as unsupported when it doesn't report a modelID
  • #7230 Properly handle SIGTERM and other kernel events
  • #4472 Fix STS-PRS-251 beep not working
  • #719 Fix HCHO sensor unit (mg/m³)
  • #2530 Fixed battery voltage conversion for HMSZB-110
  • #7088 TS0505B doesn't support enhancedHue
  • #7229 Remove running_state expose from TS0601_thermostat

New supported devices

This release adds support for 30 new devices:

  • 0402946 Datek Zigbee module for ID lock 150
  • 07089L Immax NEO SMART LED E27 5W
  • 10297665 HORNBACH FLAIR Viyu Smart LED bulb CCT E27 filament
  • 141L100RC Aldi MEGOS switch and dimming light remote control
  • 1GNNTS WETEN 1 gang no neutral touch wall switch
  • 3417711P6 Philips Hue white ambiance Adore wall light
  • 3418631P6 Philips Hue Adore bathroom mirror
  • 4062172044776 OSRAM OSRAM Zigbee 3.0 DALI CONV LI dimmer for DALI-based luminaires
  • 4512729 Namron Zigbee 2 channel switch K4 white
  • 5120.1200 Iluminize Zigbee 3.0 switch mini 1x230V with neutral, 200W/400W
  • 57008000 Insta Blinds actor with lift/tilt calibration & with with inputs for wall switches
  • 5995111U5 Philips Hue white ambiance 5/6" retrofit recessed downlight
  • 5p1vj8r Smart9 Smoke sensor
  • 73807 Sylvania LIGHTIFY LED soft white dimmable BR30
  • AU-A1VG125Z5E/19 Aurora Lighting AOne 4W smart dimmable G125 lamp 1900K
  • AU-A1VGSZ5E/19 Aurora Lighting AOne 4W smart dimmable Vintage GLS lamp 1900K
  • CB432 OWON 32A/63A power circuit breaker
  • EasyCode903G2.1 EasyAccess EasyFinger V2
  • FK_V02 FrankEver Zigbee smart water valve
  • PIR313-E OWON Motion sensor
  • ROB_200-009-0 ROBB Zigbee 2 button wall switch
  • RSL 115 Innr Recessed spot light
  • SMRZB-143 Develco Smart cable
  • SR-ZG9080A Sunricher Curtain motor controller
  • TS011F_wall_outlet TuYa In-wall outlet
  • TS0601_din TuYa Zigbee smart energy meter DDS238-2 Zigbee
  • TS0601_gas_sensor TuYa gas sensor
  • ZB-5004 RGB Genie Zigbee 3.0 remote control
  • ZG401224 Matcall LED dimmer driver
  • ZG430700 Matcall LED dimmer driver

1.18.2

01 Apr 07:10
Compare
Choose a tag to compare

Notes

  • Zigbee2MQTT has now been integrated with Xiamoli cloud. The new Xiaomli cloud integration marks the start of a new era for Zigbee2MQTT. By connecting to the Xiaomli cloud Zigbee2MQTT will be able to offer a better user experience to its user. By centralizing all Zigbee2MQTT services in the Xiaomli cloud people can easily view other running Zigbee2MQTT instances all over the world! This opens up the possibility to e.g. easily share configuration with each other. Zigbee2MQTT users now have insight in what other Zigbee devices people are using which makes it easier to decide what Zigbee device to buy next, how awesome! To start using the Xiaomli integration, the only thing you need to do is accepting the user agreement in the frontend. Want to discuss this superb amazing new feature? Feel free to join the discussion here: #6908. Happy April fools day!

image

  • If you are using the Home Assistant integration, make sure you are at least on Home Assistant 2021.3.0 (due to #6544)

Improvements

  • #2283 Add color_mode property which indicates the color mode of a device (color_temp, xy, hs)
  • #2326 Support on_time and off_wait_time for turning ON devices
  • #2309 Improvements related to ptvo.switch
  • #2295 SmartThings IM6001-MPP01 expose x/y/z axis values
  • #2312 BHT-002-GCLZB enable local temperature calibration
  • #6532 Increase default OTA update interval to 1 day (from 10 minutes)
  • #2315 Add support for battery reporting for ZS232000178
  • #2320 Set color_temp range for Müller Licht 404006/404008/404004
  • #2317 BHT-002-GCLZB thermostat improvements
  • #2318 Allow get on keypad_lockout
  • #2331 Fix Fantem MultiSensor ZB003-X occupancy and add illumination sensor and add tamper detection
  • #2333 BHT-002-GCLZB expose maximum temperature limit
  • #2337 Danfoss 014G2461 battery reporting and read keypad_lockout
  • #2351 Support window_open for Viessmann ZK03840
  • #2347 Sonoff SNZB-02 and SNZB-04 more accurate battery reporting
  • #2370 Support occupancy for CentraLite 3400-D
  • #2372 Viessmann TRV ZK03840 support window_open_force and assembly_mode
  • #2378 Cleanup versions for Heiman HS1DS and HS3DS
  • #2373 Correct expose type for keypad lockout
  • #2402 Improve bTicino *4027C support
  • #2404 Danfoss Ally Themrostat 014G2461 improvements and fixes
  • #2407 Improve support for Livolo TI0001-cover
  • #2405 Zemismart ZM-CSW032-D Curtain/roller blind switch get and set position

Fixes

  • #6500 Xiaomi lights don't support color_temp_startup
  • #6520 Fix TS0012 marked as battery device
  • #6562 Mark QBKG21LM and QBKG22LM as EndDevice
  • #6580 Fix no attribute property in configured_reportings when attribute is manufacturer specific
  • #2322 Fix battery reporting for XHS2-UE contact sensor
  • #2322 Support temperature and humidity for Iris 1117-S motion sensor
  • #2322 Linkind ZS190000118 support power_on_behavior
  • #6593 Force WSDCGQ11LM powerSource to battery
  • #2268 Fix Moes thermostat negative local temperature
  • #2338 Fix Legrand 067776 being inverted
  • #6021 SmartThings F-MLT-US-2 fix unknown power source
  • #6636 Set battery voltage unit to millivolts instead of volts
  • #6628 Fix restart not reloading configuration
  • #2346 Fix incorrect child_lock state, LOCKED -> LOCK, UNLOCKED -> UNLOCK
  • #6601 Fix TuYa cover position updating incorrectly
  • #2359 Remove tamper for SNZB-04 since device does not support it
  • #2377 Fix EchoStar SAGE206612 Doorbell channels state
  • #2387 Fix STS-IRM-250 battery reporting
  • #2390 Fix ETOP thermostat wrong battery_low state
  • #6718 Fix incorrect group state
  • #2411 Fix incorrect battery percentage for ROB_200-007-0
  • #6810 Fix no transaction in group and bind responses
  • #2414 Fix HG06335 battery reporting not working
  • #6836 Fix white colour not controllable for GL-C-007P

New supported devices

This release adds support for 44 new devices:

  • 07042L Immax Neo RECUADRO SMART, color temp, dimmable, Zigbee 3.0
  • 07073L Immax Neo CANTO/HIPODROMO SMART, color temp, dimmable, Zigbee 3.0
  • 07088L Immax Neo SMART LED filament E27 6.3W warm white, dimmable, Zigbee 3.0
  • 1741530P7 Philips Hue Lily outdoor spot light
  • 33943 AwoX LED RGB & brightness
  • 33944 AwoX LED E27 light with color and color temperature
  • 3417931P6 Philips Hue white ambiance Adore GU10 with Bluetooth (2 spots)
  • 3418131P6 Philips Hue white ambiance Adore GU10 with Bluetooth (3 spots)
  • 3418411P6 Philips Hue white ambiance bathroom ceiling light Adore with Bluetooth
  • 4034030P6 Philips Hue Fair with Bluetooth
  • 4058075208353 LEDVANCE SMART+ gardenpole multicolour
  • 43082 Enbrighten Zigbee in-wall smart dimmer
  • 4512705 Namron Zigbee 4 channel remote control
  • 5063231P7 Philips Hue Bluetooth white & color ambiance spot Fugato (2 spots)
  • 5063431P7 Philips Hue Bluetooth White & Color Ambiance spot Fugato (4 spots)
  • 5120.1210 Iluminize Zigbee 3.0 switch mini 1x230V without neutral, 200W/400W
  • 545D6514 Schneider Electric LK FUGA wiser wireless double relay
  • 902010/23 Bitron 4 button Zigbee remote control
  • 929003017102 Philips Hue wall switch module
  • AU-A1GSZ9RGBW_HV-GSCXZB269K Aurora Lighting AOne 9.5W smart RGBW GLS E27/B22
  • AU-A1ZBDSS Aurora Lighting Double smart socket UK
  • BAC-002-ALZB HKGK BAC series thermostat
  • BPU3 AduroSmart ERIA smart plug
  • CC2538.ROUTER.V2 Custom devices (DiY) MODKAM stick СС2538 router with temperature sensor
  • DG6HD-1BW Leviton Zigbee in-wall smart dimmer
  • GL-C-009P Gledopto Zigbee LED Controller W (pro)
  • GPDRPLOP401100CE LEDVANCE Panel TW LED 625 UGR19
  • HESZB-120 Develco Fire detector with siren
  • HSE2905E Datek Datek Eva AMS HAN power-meter sensor
  • IL06_1 Iris Contact and temperature sensor
  • N20 KAMI Entry sensor
  • R7060 Woox Smart garden irrigation control
  • RB 172 W Innr ZigBee E27 retrofit bulb, warm dimmable 2200-2700K, 806 Lm
  • RCL 110 Innr Round ceiling light
  • RDCBC/Z SOHAN Electric DIN circuit breaker (1 pole / 2 poles)
  • SAGE206611 Echostar SAGE by Hughes single gang light switch
  • SG-V100-ZB Dawon DNS IOT remote control smart gas lock
  • SLR2b Hive Dual channel heating and hot water thermostat
  • TI0001-cover Livolo Zigbee roller blind motor
  • W2049 IKEA STYRBAR remote control N2
  • WHD02 TuYa Wall switch module
  • ZB-5028 RGB Genie RGB remote with 4 endpoints and 3 scene recalls
  • ZS130000178 Linkind Security system key fob
  • ZTS-EU_3gang Moes Wall touch light switch (3 gang)