Shelly Plus 1 as impulse switch

[macSE1990]

I try to replace a hallway impulse switch with shelly Plus 1 and can‘t figure out the correct configuration.
In home app it should appear as normal switch or light and should show if its on or off.
The external push-button should switch the relay between on and off.
Pressing once - on, pressing again - off.
I tried to figure it out by comparing the standard switch with doorbell and lock but had no success.
Any suggestions?

[macSE1990]

I've found out myself, just removed the second entry from the binary input:

{"c":{"io":[[[26,0],2],[[25],6,1],[[4],6,0,1],[[32],10,0,3]],"l":0,"b":[[25,5]]},"a":[{"0":{"r":[[26]]},"1":{"r":[[26,1]]},"b":[[4]],"es":[{"t":22,"h":2,"n":5,"g":32,"j":10,"y0":[{"v":75,"r":1,"0":{"m":[[1]]}}]}]}]}