Skip to content

Latest commit

 

History

History
46 lines (29 loc) · 1.73 KB

README.md

File metadata and controls

46 lines (29 loc) · 1.73 KB

Customized FRR talos system extension image for BGP routing on the Kubernetes host

FRR container is used for Routing on the Host, it also peers with Metallb BGP speaker, to receive route update of load balancer IPs from Metallb, then further send to Leaf routers.

docker start script template docker-start.j2 is substitued during docker image build, /usr/lib/frr/docker-start is then generated as container start script.

frr configuration template frr.conf.j2 is pre-built into container, variables in the template will be substituted during container start-up, with server local specific values, /etc/frr/frr.conf then gets generated out of it.

Following parameters are hardcoded, will be the same on each server, you should change them according to your network environment:

  • ASN_METALLB_LOCAL: 4200099998
  • ASN_METALLB_REMOTE: 4200099999
  • NAMESPACE_METALLB: metallb
  • PEER_IP_LOCAL: 192.168.250.254
  • PEER_IP_REMOTE: 192.168.250.255
  • PEER_IP_PREFIX: 31
  • INTERFACE_MTU: 1500

Above hardcoded variables are placed into container image as /etc/frr/env.sh, to be sourced by start script.

To make the FRR system extenion to work, following dynamic varialbes need to be configured in talos machine config:

  • NODE_IP: This is basically the /32 node-ip on lo or dummy0 , defined as environment variable from talos machine config
  • ASN_LOCAL: frr local AS Number for upstream peering, defined as environment variable from talos machine config

Example machine config snippet:

machine:
  env:
    ASN_LOCAL: 4200001001
    NODE_IP: 10.10.10.10

Build the image locally

docker build -t frr-talos-extension .

Image is available at abckey/frr-talos-extension