RFC1233-MIB

-- Changes for RFC1233 (DS3 MIB):
--      Changes from RFC-1239 applied which include:
--              removing import of experimental,
--              adding import of transmission, changing
--              ds3 to be { transmission 30 }
--              instead of { experimental 15 }
--      Changed defintions and references from "DS3" to "Ds3" for
--              the following: DS3ConfigEntry, DS3IntervalEntry,
--              DS3CurrentEntry, DS3TotalEntry
--      Question: should the description for ds3SendCode say
--              "DS3" instead of "DS1"?
-- dperkins@scruznet.com

              RFC1233-MIB DEFINITIONS ::= BEGIN

              -- RFC1233
              -- May 91

              IMPORTS
                      Counter
                              FROM RFC1155-SMI
                      DisplayString, transmission
                              FROM RFC1213-MIB
                      OBJECT-TYPE
                              FROM RFC-1212;


               --  this is the MIB module for the DS3 objects

               ds3     OBJECT IDENTIFIER ::= { transmission 30 }

               -- the DS3 Configuration group

               -- Although the objects in this group are read-only, at
               -- the agent's discretion they may be made read-write
               -- so that the management station, when appropriately
               -- authorized, may change the behavior of the CSU,
               -- e.g., to place the device into a loopback state.

               -- Implementation of this group is mandatory for all
               -- systems that attach to a DS3 Interface.

               ds3ConfigTable OBJECT-TYPE
                   SYNTAX  SEQUENCE OF Ds3ConfigEntry
                   ACCESS  not-accessible
                   STATUS  mandatory
                   DESCRIPTION
                           "The Ds3 Configuration table."
                  ::= { ds3 1 }

              ds3ConfigEntry OBJECT-TYPE
                  SYNTAX  Ds3ConfigEntry
                  ACCESS  not-accessible
                  STATUS  mandatory
                  DESCRIPTION
                          "An entry in the Ds3 Configuration table."
                 INDEX   { ds3CSUIndex }
                 ::= { ds3ConfigTable 1 }

             Ds3ConfigEntry ::=
                 SEQUENCE {
                     ds3CSUIndex
                         INTEGER,
                     ds3Index
                         INTEGER,
                     ds3TimeElapsed
                         INTEGER (1..900),
                     ds3ValidIntervals
                         INTEGER (0..96),
                     ds3LineType
                         INTEGER,
                     ds3ZeroCoding
                         INTEGER,
                     ds3Loopback
                         INTEGER,
                     ds3SendCode
                         INTEGER,
                     ds3YellowAlarm
                         INTEGER,
                     ds3RedAlarm
                         INTEGER,
                     ds3CircuitIdentifier
                         DisplayString (SIZE (0..255))
             }

             ds3CSUIndex OBJECT-TYPE
                 SYNTAX  INTEGER
                 ACCESS  read-only
                 STATUS  mandatory
                 DESCRIPTION
                         "The index value which uniquely identifies the
                         CSU to which this entry is applicable."
                ::= { ds3ConfigEntry 1 }

            ds3Index OBJECT-TYPE
                SYNTAX  INTEGER
                ACCESS  read-only
                STATUS  mandatory
                DESCRIPTION
                        "An index value that uniquely identifies a DS3
                        Interface.  The interface identified by a
                        particular value of this index is the same
                        interface as identified by the same value an
                        ifIndex object instance."
               ::= { ds3ConfigEntry 2 }

           ds3TimeElapsed OBJECT-TYPE
               SYNTAX  INTEGER (1..900)
               ACCESS  read-only
               STATUS  mandatory
               DESCRIPTION
                       "The number of seconds, including partial
                       seconds, that have elapsed since the beginning of
                       the current error-measurement period."
              ::= { ds3ConfigEntry 3 }

          ds3ValidIntervals OBJECT-TYPE
              SYNTAX  INTEGER (0..96)
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The number of previous intervals for which valid
                      data was collected.  The value will be 96 unless
                      the CSU device was brought online within the last
                      24 hours, in which case the value will be the
                      number of complete 15 minute intervals the CSU has
                      been online."
              ::= { ds3ConfigEntry 4 }

          ds3LineType OBJECT-TYPE
              SYNTAX  INTEGER {
                          other(1),
                          ds3M23(2),
                          ds3SYNTRAN(3),
                          ds3CbitParity(4),
                          ds3ClearChannel(5)
                      }
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "This variable indicates the variety of DS3 C-bit
                      application implementing this circuit.  The type
                      of circuit affects the interpretation of the usage
                      and error statistics.  The rate of all of them is
                      44.736 Mbps.

                      The values, in sequence, describe:
                      TITLE:            SPECIFICATION:
                      ds3M23            ANSI T1.107-1988 [10]
                      ds3SYNTRAN        ANSI T1.107-1988 [10]
                      ds3C-bitParity    ANSI T1.107a-1989 [10a]
                      ds3ClearChannel   ANSI T1.102-1987 [9]
                      "
              ::= { ds3ConfigEntry 5 }

          ds3ZeroCoding OBJECT-TYPE
              SYNTAX  INTEGER {
                          ds3other(1),
                          ds3B3ZS(2)
                      }
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "This variable describes the variety of Zero Code
                      Suppression used on the link, which in turn
                      affects a number of its characteristics.
                      ds3B3ZS refers to the use of specified patterns of
                      normal bits and bipolar violations which are used
                      to replace sequences of zero bits of a specified
                      length."
              ::= { ds3ConfigEntry 6 }

          ds3Loopback OBJECT-TYPE
              SYNTAX  INTEGER {
                          ds3NoLoop(1),
                          ds3LocalLoopbackLocalSide(2),
                          ds3LocalLoopbackRemoteSide(3),
                          ds3RemoteLoopbackLocalSide(4),
                          ds3RemoteLoopbackRemoteSide(5)
                      }
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "This variable represents the loopback state of
                      the CSU.  Devices supporting read/write access
                      should return badValue in response to a requested
                      loopback state that the CSU does not support.  The
                      values mean:

                        ds3NoLoop
                           Not in the loopback state.  A device that is
                           not capable of performing a loopback on
                           either interface shall always return this as
                           it's value.

                        ds3LocalLoopbackLocalSide
                           Signal received from the local side of the
                           device is looped back at the local connector
                           (eg, without involving the CSU).

                        ds3LocalLoopbackRemoteSide
                           Signal received from the local side of the
                           device is looped back at the remote connector
                           (eg, through the CSU).

                        ds3RemoteLoopbackLocalSide
                           Signal received from the remote side of the
                           device is looped back at the local connector
                           (eg, through the CSU).

                        ds3RemoteLoopbackRemoteSide
                           Signal received from the remote side of the
                           device is looped back at the remote connector
                           (eg, without involving the CSU).

                      Note that M23 and ClearChannel interfaces do not
                      support the Loopback managed object."
              ::= { ds3ConfigEntry 7 }


          ds3SendCode OBJECT-TYPE
              SYNTAX  INTEGER {
                          ds3SendTestMessage(1),
                          ds3SendNoCode(2),
                          ds3SendSetCode(3),
                          ds3SendLoopbackCode(4),
                          ds3SendResetCode(5)
                      }
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "This variable indicates what type of code is
                      being sent across the DS1 circuit by the CSU.  The
                      values mean:

                        ds3SendNoCode
                           sending looped or normal data

                        ds3SendSetCode
                           sending a loopback request

                        ds3SendLoopbackCode
                           sending the code to choose a specific
                           loopback

                        ds3SendResetCode
                           sending a loopback termination request

                        ds3SendTestMessage
                           sending a Test pattern as defined in
                           T1.107a-1989 [10a].
                      "
                       ::= { ds3ConfigEntry 8 }

                   ds3YellowAlarm OBJECT-TYPE
                       SYNTAX  INTEGER {
                                   ds3YellowAlarm(1),
                                   ds3NoYellowAlarm(2)
                               }
                       ACCESS  read-only
                       STATUS  mandatory
                       DESCRIPTION
                               "This variable indicates if a Yellow
                               Alarm condition exists."
                      ::= { ds3ConfigEntry 9 }

                  ds3RedAlarm OBJECT-TYPE
                      SYNTAX  INTEGER {
                                  ds3RedAlarm(1),
                                  ds3NoRedAlarm(2)
                              }
                      ACCESS  read-only
                      STATUS  mandatory
                      DESCRIPTION
                              "This variable indicates if a Red Alarm
                              condition exists."
                     ::= { ds3ConfigEntry 10 }

                 ds3CircuitIdentifier OBJECT-TYPE
                     SYNTAX  DisplayString (SIZE (0..255))
                     ACCESS  read-only
                     STATUS  mandatory
                     DESCRIPTION
                             "This variable contains the transmission
                             vendor's circuit identifier, for the
                             purpose of facilitating troubleshooting."
                    ::= { ds3ConfigEntry 11 }


                -- the DS3 Interval group

                -- Implementation of this group is mandatory for all
                -- systems that attach to a DS3 interface.

                -- The DS3 Interval Table contains various statistics
                -- collected by each CSU over the previous 24 hours of
                -- operation.  The past 24 hours are broken into 96
                -- completed 15 minute intervals.

                ds3IntervalTable OBJECT-TYPE
                    SYNTAX  SEQUENCE OF Ds3IntervalEntry
                    ACCESS  not-accessible
                    STATUS  mandatory
                    DESCRIPTION
                            "The DS3 Interval table."
                   ::= { ds3 2 }

               ds3IntervalEntry OBJECT-TYPE
                   SYNTAX  Ds3IntervalEntry
                   ACCESS  not-accessible
                   STATUS  mandatory
                   DESCRIPTION
                           "An entry in the DS3 Interval table."
                  INDEX   { ds3IntervalIndex, ds3IntervalNumber }
                  ::= { ds3IntervalTable 1 }

              Ds3IntervalEntry ::=
                  SEQUENCE {
                      ds3IntervalIndex
                          INTEGER,
                      ds3IntervalNumber
                          INTEGER (1..96),
                      ds3IntervalESs
                          Counter,
                      ds3IntervalSESs
                          Counter,
                      ds3IntervalSEFSs
                          Counter,
                      ds3IntervalUASs
                          Counter,
                      ds3IntervalCSSs
                          Counter,
                      ds3IntervalBPVs
                          Counter,
                      ds3IntervalCVs
                          Counter
                  }

              ds3IntervalIndex OBJECT-TYPE
                  SYNTAX  INTEGER
                  ACCESS  read-only
                  STATUS  mandatory
                  DESCRIPTION
                          "The index value which uniquely identifies the
                          CSU to which this entry is applicable.  The
                          interface identified by a particular value of
                          this index is the same interface as identified
                          by the same value an DS3CSUIndex object
                          instance."
                 ::= { ds3IntervalEntry 1 }

             ds3IntervalNumber OBJECT-TYPE
                 SYNTAX  INTEGER (1..96)
                 ACCESS  read-only
                 STATUS  mandatory
                 DESCRIPTION
                         "A number between 1 and 96, where 1 is the most
                         recently completed 15 minute interval and 96 is
                         the least recently completed 15 minutes
                         interval (assuming that all 96 intervals are
                         valid)."
                ::= { ds3IntervalEntry 2 }


            ds3IntervalESs OBJECT-TYPE
                SYNTAX  Counter
                ACCESS  read-only
                STATUS  mandatory
                DESCRIPTION
                        "The counter associated with the number of
                        Errored Seconds, as defined by [12], encountered
                        by a DS3 CSU in one of the previous 96,
                        individual 15 minute, intervals."
               ::= { ds3IntervalEntry 3 }

           ds3IntervalSESs OBJECT-TYPE
               SYNTAX  Counter
               ACCESS  read-only
               STATUS  mandatory
               DESCRIPTION
                       "The counter associated with the number of
                       Severely Errored Seconds, as defined by [12],
                       encountered by a DS3 CSU in one of the previous
                       96, individual 15 minute, intervals."
              ::= { ds3IntervalEntry 4 }

          ds3IntervalSEFSs OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The counter associated with the number of
                      Severely Errored Framing Seconds, as defined by
                      [12], encountered by a DS3 CSU in one of the
                      previous 96, individual 15 minute, intervals."
              ::= { ds3IntervalEntry 5 }

          ds3IntervalUASs OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The counter associated with the number of
                      Unavailable Seconds, as defined by [12],
                      encountered by a DS3 CSU in one of the previous
                      96, individual 15 minute, intervals."
              ::= { ds3IntervalEntry 6 }

          ds3IntervalCSSs OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The counter associated with the number of
                      Controlled Slip Seconds, as defined by [12],
                      encountered by a DS3 CSU in one of the previous
                      96, individual 15 minute, intervals.

                      Note that SYNTRAN interfaces are the only
                      interfaces that support the Controlled Slip
                      Seconds managed object.  Accordingly, agents
                      configured with non-SYNTRAN interfaces may treat
                      this object as having an ACCESS clause value of
                      not-accessible."
              ::= { ds3IntervalEntry 7}

          ds3IntervalBPVs OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The counter associated with the number of Bipolar
                      Violations, as defined by [12], encountered by a
                      DS3 CSU in one of the previous 96, individual 15
                      minute, intervals."
              ::= { ds3IntervalEntry 8 }

          ds3IntervalCVs OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The counter associated with the number of Coding
                      Violations, as defined by [12], encountered by a
                      DS3 CSU in one of the previous 96, individual 15
                      minute, intervals."
              ::= { ds3IntervalEntry 9 }


          -- the DS3 Current group

          -- Implementation of this group is mandatory for all systems
          -- that attach to a DS3 Interface.

          -- The DS3 current table contains various statistics being
          -- collected for the current 15 minute interval.


          ds3CurrentTable OBJECT-TYPE
              SYNTAX  SEQUENCE OF Ds3CurrentEntry
              ACCESS  not-accessible
              STATUS  mandatory
              DESCRIPTION
                      "The DS3 Current table."
              ::= { ds3 3 }

          ds3CurrentEntry OBJECT-TYPE
              SYNTAX  Ds3CurrentEntry
              ACCESS  not-accessible
              STATUS  mandatory
              DESCRIPTION
                      "An entry in the DS3 Current table."
              INDEX   { ds3CurrentIndex }
              ::= { ds3CurrentTable 1 }

          Ds3CurrentEntry ::=
              SEQUENCE {
                  ds3CurrentIndex
                      INTEGER,
                  ds3CurrentESs
                      Counter,
                  ds3CurrentSESs
                      Counter,
                  ds3CurrentSEFSs
                      Counter,
                  ds3CurrentUASs
                      Counter,
                  ds3CurrentCSSs
                      Counter,
                  ds3CurrentBPVs
                      Counter,
                  ds3CurrentCVs
                      Counter
              }

          ds3CurrentIndex OBJECT-TYPE
              SYNTAX  INTEGER
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The index value which uniquely identifies the CSU
                      to which this entry is applicable.  The interface
                      identified by a particular value of this index is
                      the same interface as identified by the same value
                      an DS3CSUIndex object instance."
              ::= { ds3CurrentEntry 1 }

          ds3CurrentESs OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The counter associated with the number of Errored
                      Seconds, as defined by [12], encountered by a DS3
                      CSU in the current 15 minute interval."
              ::= { ds3CurrentEntry 2 }

          ds3CurrentSESs OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The counter associated with the number of
                      Severely Errored Seconds, as defined by [12],
                      encountered by a DS3 CSU in the current 15 minute
                      interval."
              ::= { ds3CurrentEntry 3 }

          ds3CurrentSEFSs OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The counter associated with the number of
                      Severely Errored Framing Seconds, as defined by
                      [12], encountered by a DS3 CSU in the current 15
                      minute interval."
              ::= { ds3CurrentEntry 4 }

          ds3CurrentUASs OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The counter associated with the number of
                      Unavailable Seconds, as defined by [12],
                      encountered by a DS3 CSU in the current 15 minute
                      interval."
              ::= { ds3CurrentEntry 5 }

          ds3CurrentCSSs OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The counter associated with the number of
                      Controlled Slip Seconds, as defined by [12],
                      encountered by a DS3 CSU in the current 15 minute
                      interval.

                      Note that SYNTRAN interfaces are the only
                      interfaces that support the Controlled Slip
                      Seconds managed object.  Accordingly, agents
                      configured with non-SYNTRAN interfaces may treat
                      this object as having an ACCESS clause value of
                      not-accessible."
              ::= { ds3CurrentEntry 6 }

          ds3CurrentBPVs OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The counter associated with the number of Bipolar
                      Violations, as defined by [12], encountered by a
                      DS3 CSU in the current 15 minute interval."
              ::= { ds3CurrentEntry 7}

          ds3CurrentCVs OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The counter associated with the number of Coding
                      Violations, as defined by [12], encountered by a
                      DS3 CSU in the current 15 minute interval."
              ::= { ds3CurrentEntry 8 }


          -- the DS3 Total group

          -- Implementation of this group is mandatory for all systems
          -- that attach to a DS3.

          -- The DS3 Total Table contains the cumulative sum of the
          -- various statistics for the 24 hour interval preceding the
          -- first valid interval in the DS3CurrentTable.

          ds3TotalTable OBJECT-TYPE
              SYNTAX  SEQUENCE OF Ds3TotalEntry
              ACCESS  not-accessible
              STATUS  mandatory
              DESCRIPTION
                      "The DS3 Total table.  24 hour interval."
              ::= { ds3 4 }

          ds3TotalEntry OBJECT-TYPE
              SYNTAX  Ds3TotalEntry
              ACCESS  not-accessible
              STATUS  mandatory
              DESCRIPTION
                      "An entry in the DS3 Total table."
              INDEX   { ds3TotalIndex }
              ::= { ds3TotalTable 1 }

          Ds3TotalEntry ::=
              SEQUENCE {
                  ds3TotalIndex
                      INTEGER,
                  ds3TotalESs
                      Counter,
                  ds3TotalSESs
                      Counter,
                  ds3TotalSEFSs
                      Counter,
                  ds3TotalUASs
                      Counter,
                  ds3TotalCSSs
                      Counter,
                  ds3TotalBPVs
                      Counter,
                  ds3TotalCVs
                      Counter
              }

          ds3TotalIndex OBJECT-TYPE
              SYNTAX  INTEGER
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The index value which uniquely identifies the CSU
                      to which this entry is applicable.  The interface
                      identified by a particular value of this index is
                      the same interface as identified by the same value
                      an DS3CSUIndex object instance."
              ::= { ds3TotalEntry 1 }

          ds3TotalESs OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The counter associated with the number of Errored
                      Seconds, as defined by [12], encountered by a DS3
                      CSU in the previous 24 hour interval."
              ::= { ds3TotalEntry 2 }

          ds3TotalSESs OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The counter associated with the number of
                      Severely Errored Seconds, as defined by [12],
                      encountered by a DS3 CSU in the previous 24 hour
                      interval."
              ::= { ds3TotalEntry 3 }

          ds3TotalSEFSs OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The counter associated with the number of
                      Severely Errored Framing Seconds, as defined by
                      [12], encountered by a DS3 CSU in the previous 24
                      hour interval."
              ::= { ds3TotalEntry 4 }

          ds3TotalUASs OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The counter associated with the number of
                      Unavailable Seconds, as defined by [12],
                      encountered by a DS3 CSU in the previous 24 hour
                      interval."
              ::= { ds3TotalEntry 5 }

          ds3TotalCSSs OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The counter associated with the number of
                      Controlled Slip Seconds, as defined by [12],
                      encountered by a DS3 CSU in the previous 24 hour
                      interval.
                      Note that SYNTRAN interfaces are the only
                      interfaces that support the Controlled Slip
                      Seconds managed object.  Accordingly, agents
                      configured with non-SYNTRAN interfaces may treat
                      this object as having an ACCESS clause value of
                      not-accessible."
              ::= { ds3TotalEntry 6 }

          ds3TotalBPVs OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The counter associated with the number of Bipolar
                      Violations, as defined by [12], encountered by a
                      DS3 CSU in the previous 24 hour interval."
              ::= { ds3TotalEntry 7 }

          ds3TotalCVs OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The counter associated with the number of Coding
                      Violations, as defined by [12], encountered by a
                      DS3 CSU in the previous 24 hour interval."
              ::= { ds3TotalEntry 8 }

          END