ledstrip.yaml

substitutions:
  devicename: ledstrip
  upper_devicename: Bureau
  light_id_alarme: ledstrip_bureau
  buzzer_pwm: D6
  buzzer_platform: esp8266_pwm
  bme280_i2c_sda: D2
  bme280_i2c_scl: D1

packages:
  device_base: !include common/device_base.yaml
  device_esp32: !include common/device_esp8266.yaml
  alarme: !include common/sensors_alarme.yaml
  buzzer: !include common/buzzer.yaml
  bme280: !include common/bme280.yaml

esphome:
  name: ${devicename}
  friendly_name: ${upper_devicename}

esp8266:
  board: nodemcuv2

wifi:
  manual_ip:
    static_ip: 192.168.1.200
    gateway: 192.168.1.1
    subnet: 255.255.255.0

# Enable logging
# Set logger to NOT default pins because we are using RX and TX for driving LEDs
logger:
  baud_rate: 0
  hardware_uart: uart1

light:
  - platform: neopixelbus
    #internal: true
    name: "FastLED SPI Light"
    id: ledstrip_bureau
    type: RGB
    variant: P9813
    num_leds: 2
    data_pin: D7  # GPIO13 preferred for neopixelbus on ESP8266
    clock_pin: D5  # GPIO14 required for neopixelbus on ESP8266
    # method:
    #   type: spi
    #   speed: 0.500MHz
    # gamma_correct: 1.8
   # color_correct: [100%, 68%, 46%]
  #   effects:
  #     - <<: !include common/light_effect_alarme.yaml
  #     - pulse:
  #     - addressable_rainbow:
  #     - flicker:
  #     - flicker:
  #         name: Flicker more deviant
  #         alpha: 60%
  #     - flicker:
  #         name: Flicker more intense and deviant
  #         intensity: 20%
  #         alpha: 60%
  #     - random:
  #     - addressable_twinkle:
  #     - addressable_random_twinkle:
  #     - addressable_fireworks:
  #     - addressable_fireworks:
  #         name: Fireworks Effect With Random Colors
  #         use_random_color: true
  #     - addressable_fireworks:
  #         name: Very slow Fireworks Effect With Random Colors
  #         use_random_color: true
  #         spark_probability: 20%
  #         fade_out_rate: 90
  #     - addressable_flicker:
  #     - addressable_flicker:
  #         name: Addressable Flicker more intense
  #         intensity: 60%
  #     - addressable_color_wipe:
  #     - addressable_color_wipe:
  #         name: Color Wipe Effect With Custom Values
  #         add_led_interval: 1s
  #     - addressable_lambda:
  #         name: "Fireplace simple"
  #         update_interval: 30ms
  #         lambda: |-
  #           // it.size() - Number of LEDs
  #           // it[num] - Access the LED at index num.
  #           // Set the LED at num to the given r, g, b values
  #           // it[num] = ESPColor(r, g, b);
  #           // Get the color at index num (ESPColor instance)
  #           // it[num].get();

  #           it[0] = ESPHSVColor(30 + random_uint32() % 30, 255, 135 + random_uint32() % 120).to_rgb();
  #           it[1] = ESPHSVColor(random_uint32() % 30, 255, 135 + random_uint32() % 120).to_rgb();
  #           it[2] = ESPHSVColor(42, 255, 135 + random_uint32() % 120).to_rgb();

  # - platform: partition
  #   name: "porte bas"
  #   segments:
  #     - id: ledstrip_bureau
  #       from: 0
  #       to: 0

  # - platform: partition
  #   name: "porte haut"
  #   segments:
  #     - id: ledstrip_bureau
  #       from: 1
  #       to: 1