You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
insect claims to support bel and decibel (as per the README and #67). However it doesn't seem to be able to do actually do much useful with them.
Would it be possible to add support for the following use cases?
1. Converting between decibel values and ratios
> 6 dB -> scalar
Challenge: should it return 4 (power ratio) or 2 (amplitude ratio)? Maybe it would need to be made explicit:
> 6 dB power -> scalar
Expected output: 4.
If there is a default, it needs to be power.
And back:
> 10 -> decibel power
Ideally it will automatically infer power/amplitude where possible. Probably complicated due to the fact that we probably lose the information whether we're dealing with power quantities or root power quantities before we even get to the scalar to decibel conversion.
> 100 mW / 1 mW -> decibel
Expected answer: 20 dB
2. Applying decibel values to quantities
> 20 decibel mV -> V
> 10dB * 1mW -> W
> 10 dBmW -> W
Expected answers: 0.01V and 0.01W and 0.01W
Note again that power and root-power quantities need to be treated differently.
Reverse direction:
> 10mW -> dBmW
> 10mV -> dBV
3. Converting between decibels of power and decibels of amplitude
> 10 decibel power -> decibel amplitude
Expected answer: 20 dB amplitute
Technical context (for anyone not familiar with decibels)
Decibel (and bel, which is rarely used) are usually used as a way of expressing ratios between power quantities (e.g. watts) or root power quantities (e.g. volts). For example, 10dB means a factor 10 increase in power; 20dB means a factor of 10 (!) in increase in e.g. voltage.
This notation is pervasive in many fields, such as RF engineering (both because it turns multiplications into additions (e.g. for loss calculations), and because it allows easier representation of extremely wide ranges of values (femtowatts ... megawatts).
As a special case, decibel is also often used to express power quantities and root power quantities, by specifying a decibel value (e.g. 15dB) with reference to a convenient base value (such as 1mW).
15dBmV usually means "15 dB relative to 1 mV" = (10^(15 / 20)) * 1mV = 5.6mV (note divisor 20 because its an amplitude / root power quantity)
15dBmW usually means "15 dB relative to 1 mW" = (10^(15 / 10)) * 1mW = 31.62mW (note divisor 10 because it's a power quantity)
The text was updated successfully, but these errors were encountered:
Thank you very much for this detailed feature request. I currently don't have the time to implement this or to think about the detailed design. I am afraid that it might pose some challenges indeed.
What you can definitely do is to define functions that would do useful conversions for you. Like
Thanks for writing insect; I like it a lot!
Feature request
insect claims to support bel and decibel (as per the README and #67). However it doesn't seem to be able to do actually do much useful with them.
Would it be possible to add support for the following use cases?
1. Converting between decibel values and ratios
Challenge: should it return 4 (power ratio) or 2 (amplitude ratio)? Maybe it would need to be made explicit:
Expected output: 4.
If there is a default, it needs to be power.
And back:
Ideally it will automatically infer power/amplitude where possible. Probably complicated due to the fact that we probably lose the information whether we're dealing with power quantities or root power quantities before we even get to the scalar to decibel conversion.
Expected answer: 20 dB
2. Applying decibel values to quantities
Expected answers: 0.01V and 0.01W and 0.01W
Note again that power and root-power quantities need to be treated differently.
Reverse direction:
3. Converting between decibels of power and decibels of amplitude
Expected answer: 20 dB amplitute
Technical context (for anyone not familiar with decibels)
Decibel (and bel, which is rarely used) are usually used as a way of expressing ratios between power quantities (e.g. watts) or root power quantities (e.g. volts). For example, 10dB means a factor 10 increase in power; 20dB means a factor of 10 (!) in increase in e.g. voltage.
This notation is pervasive in many fields, such as RF engineering (both because it turns multiplications into additions (e.g. for loss calculations), and because it allows easier representation of extremely wide ranges of values (femtowatts ... megawatts).
As a special case, decibel is also often used to express power quantities and root power quantities, by specifying a decibel value (e.g. 15dB) with reference to a convenient base value (such as 1mW).
15dBmV
usually means "15 dB relative to 1 mV" =(10^(15 / 20)) * 1mV = 5.6mV
(note divisor 20 because its an amplitude / root power quantity)15dBmW
usually means "15 dB relative to 1 mW" =(10^(15 / 10)) * 1mW = 31.62mW
(note divisor 10 because it's a power quantity)The text was updated successfully, but these errors were encountered: