Update README.md

README.md

@@ -1,41 +1,61 @@
 # Cubieboard A10
 
-[![](Cubieboard.jpeg)](250px-Cubieboard.jpeg "Cubieboard A10")
+[![](Cubieboard.jpeg)](Cubieboard.jpeg "Cubieboard A10")
 
-**Manufacturer	CubieTech, Cubieboard
-Dimensions	10cm x 6cm
-Release Date	October 2012**
+**Manufacturer	CubieTech, Cubieboard**
+
+**Dimensions	10cm x 6cm**
+
+**Release Date	October 2012**
 
 ### Hardware Specs
-AllWinnerTech SOC A10?ARM® Cortex™-A8 ARM® Mali400 MP1 Complies with OpenGL ES 2.0/1.1
+AllWinnerTech SOC A10?ARM® Cortex™-A8 ARM® Mali400 MP1 Complies with OpenGL ES 2.0/1.1
+
 1GB DDR3 @480MHz
+
 4GB internal NAND flash, up to 32GB on SD slot, up to 2T on 2.5 SATA disk
+
 5VDC input 2A or USB otg input
+
 1x 10/100 ethernet, support usb wifi
+
 2x USB 2.0 HOST, 1x mini USB 2.0 OTG, 1x micro sd
+
 1x HDMI 1080P display output
+
 1x IR, 1x line in, 1x line out
+
 96 extend pin interface, including I2C, SPI, RGB/LVDS, CSI/TS, FM-IN, ADC, CVBS, VGA, SPDIF-OUT, R-TP, and more
 
 ## Links
 [linux-sunxi.org Cubieboard](http://linux-sunxi.org/Cubieboard)
+
 [CubieBoard Forum](http://www.cubieforums.com/)
+
 [CubieBoard Forum](http://www.cubieforums.com/)
 
+
 ## Images
 [Images_Ubuntu](https://linux-sunxi.org/Cubieboard/Images_Ubuntu)
+
 [Cubieboard1 porting to cm-10.1(android-4.2.2)](https://github.com/jungleji/android_device_softwinner_cubieboard1)
+
 [Installing_androidtv_for_cubieboard](http://docs.cubieboard.org/tutorials/cb1/installation/installing_androidtv_for_cubieboard)
 
 **User&passwd**
--user: cubie passwd:cubieboard 
+
+-user: cubie passwd:cubieboard
+
 -user: root  passwd:cubieboard 
 
 ## Device firmware
-Install Livesuit or PhoenixSuit
-Enter FEL Mode
-Press the FEL key when power up(the FEL key is the one under the USB OTG port), The CPU automatically enters FEL mode. Livesuit will start to write the image to Nand on board.
+1. Install Livesuit or PhoenixSuit
+
+2. Enter FEL Mode
+
+3. Press the FEL key when power up(the FEL key is the one under the USB OTG port), The CPU automatically enters FEL mode. Livesuit will start to write the image to Nand on board.
 
 ## Tools
 [LiveSuit](http://linux-sunxi.org/LiveSuite)
-[Install Livesuit or PhoenixSuit](http://docs.cubieboard.org/tutorials/cb1/installation/cb1_android_4.0.x_nand_install)
+
+[Install Livesuit or PhoenixSuit](http://docs.cubieboard.org/tutorials/cb1/installation/cb1_android_4.0.x_nand_install)