source upload

luffyhwl · Dec 10, 2008 · 95a8838 · 95a8838
commit 95a8838
Show file tree

Hide file tree

Showing 74 changed files with 17,811 additions and 0 deletions.
diff --git a/8042/8042.cpp b/8042/8042.cpp
diff --git a/8042/8042.def b/8042/8042.def
@@ -0,0 +1,26 @@
+EXPORTS
+
+	;
+	; export all
+	;
+
+	; 8042 functions
+	I8xDrainOutputBuffer
+	I8xGetBytePolled
+	I8xPutBytePolled
+	I8xGetByteAsynchronous
+	KeybdSetLedIndicators
+
+	; Interrupts
+	GetVector
+	GetAPICValue
+	GetIOAPICIntVector
+	IoHookInterrupt
+
+	; ISR
+	InterruptService
+	KeyboardISR
+
+	; Entry & unload
+	DriverEntry
+	DriverUnload
diff --git a/8042/8042.h b/8042/8042.h
@@ -0,0 +1,193 @@
+#ifndef _8042_H_
+#define _8042_H_
+
+/******************************************************************\
+ *            8042 registers, commans, responses                  *
+\******************************************************************/
+
+//
+// 8042 keyboard registers
+//
+
+#define KBD_STATUS_REGISTER		((PUCHAR)0x64)	// Status register, Read-Only
+#define KBD_CONTROL_REGISTER	((PUCHAR)0x64)	// Control register, Write-Only
+#define KBD_DATA_REGISTER		((PUCHAR)0x60)	// Data regiser, Read/Write
+
+//
+// 8042 contoller commands (port 64h)
+//
+
+#define I8042_READ_COMMAND_BYTE		0x20		// Read i8042 command byte
+#define I8042_WRITE_COMMAND_BYTE	0x60		// Write i8042 command byte
+#define I8042_DISABLE_MOUSE			0xA7		// Disable mouse
+#define I8042_ENABLE_MOUSE			0xA8		// Enable mouse
+#define I8042_AUXILIARY_DEVICE_TEST	0xA9		// Auxiliary device test
+#define I8042_SELF_TEST				0xAA		// Self test of i8042
+#define I8042_KEYBOARD_DEVICE_TEST	0xAB		// Keyboard test
+#define I8042_READ_RAMCTRL			0xAC		// Read controller's RAM
+#define I8042_DISABLE_KEYBOARD		0xAD		// Disable keyboard
+#define I8042_ENABLE_KEYBOARD		0xAE		// Enable keyboard
+#define I8042_READ_INPORT			0xC0		// Read i8042 input port
+												// Bit description:
+												//  bit  7	  0=KeyLock enabled
+												//  bit  6	  videomode, 0=CGA, 1=MDA
+												//  bit  5	  reserved
+												//  bit  4    system RAM: 0 = more than 512K, 1=256K
+												//  bits 3:2  reserved
+												//  bit  1    data input of aux interface (MOUSE)
+												//  bit  0    data input of main interface (KEYB)
+#define I8042_READ_OUTPORT			0xD0		// Read i8042 output port
+#define I8042_WRITE_OUTPORT			0xD1		// Write i8042 output port
+												// Bit description:
+												//  bit  7    serial keyboard data
+												//  bit  6    keyboard interface synchronization
+												//  bit  5    IRQ from aux. interface (IRQ12, MOUSE)
+												//  bit  4    IRQ from main interface (IRQ1, KEYBRD)
+												//  bit  3    aux interface (mouse) syncronization
+												//  bit  2    serial auxiliary (mouse) data
+												//  bit  1    Gate A20
+												//  bit  0    processor reset
+#define I8042_WRITE_OUTPUT_REGISTER	0xD2
+#define I8042_WRITE_AUXOUT_REGISTER	0xD3
+#define I8042_WRITE_TO_AUX_DEVICE	0xD4		// Write to auxiliary device
+#define I8042_DISABLE_A20_CONTROL	0xDD		// Enable A20 line control
+#define I8042_ENABLE_A20_CONTROL	0xDF		// Disable A20 line contol
+
+//
+// 8042 controller command byte (read/write by commands 20h/60h)
+//
+
+#define I8042CCB_ENABLE_KEYBOARD_INTERRUPT	0x01
+#define I8042CCB_ENABLE_MOUSE_INTERRUPT		0x02
+#define I8042CCB_DISABLE_KEYBOARD_DEVICE	0x10
+#define I8042CCB_DISABLE_MOUSE_DEVICE		0x20
+#define I8402CCB_KEYBOARD_TRANSLATE_MODE	0x40
+
+//
+// 8042 conroller status regiser bits (port 64h)
+//
+
+#define I8042_OUTPUT_BUFFER_FULL	0x01
+#define I8042_INPUT_BUFFER_FULL		0x02
+#define I8042_AUXIN_BUFFER_FULL		0x02
+#define I8042_RESET_OK				0x04
+#define I8042_COMMAND_OR_DATA		0x08
+#define I8042_KEY_LOCKED			0x10
+#define I8042_AUXOUT_BUFFER_FULL	0x20
+#define I8042_GENERAL_TIMEOUT		0x40
+#define I8042_PARITY_ERROR			0x80
+
+#define BUFFER_FULL (I8042_OUTPUT_BUFFER_FULL|I8042_AUXOUT_BUFFER_FULL)
+
+//
+// 8042 responses
+//
+
+#define I8042RS_ACKNOWLEDGE			0xFA
+#define I8042RS_RESEND				0xFE
+
+
+/******************************************************************\
+ *            keyboard registers, commans, responses              *
+\******************************************************************/
+
+//
+// Keyboard commands
+//
+
+#define KBD_ENABLE_SCAN				0xAE		// Enable scan
+#define KBD_DISABLE_SCAN			0xAD		// Disable scan
+#define KBD_SET_INDICATORS			0xED		// Set/reset mode indicators (LEDs)
+												// The following data byte:
+												//  bit 0:  1=enable Scroll Lock
+												//  bit 1:  1=enable Num Lock
+												//  bit 2:  1=enable Caps Lock
+#define KBD_ECHO					0xEE		// Send echo diag. command.
+												// Response should be EE
+#define KBD_SELECT_SCAN_CODE_SET	0xF0		// Select scan-code set
+#define KBD_READ_ID_CODE			0xF2		// Read 2-byte identifier
+#define KBD_SET_TYPENATIC_RATE		0xF3		// Set typematic rate/delay
+												// The following data byte:
+												//  bit  7    =0
+												//  bits 6:5  delay, ms.: 00=250, 01=500, 10=750, 11=1000
+												//  bits 4:0  =00-1F, repeat rate, Hz:
+												//
+												//  float kbd_repeat_rate[0x20] = {
+												//    30.0, 26.7, 24.0, 21.8, 20.0, 18.5, 17.1, 16.0, 15.0, 13.3,
+												//       0, 10.0,  9.2,    0,  8.0,  7.5,    0,  6.0,    0,  5.0,
+												//       0,    0,  4.0,    0,    0,  3.0,    0,    0,    0,    0,
+												//     2.0
+												//    };
+												//
+#define KBD_ENABLE_KEYBOARD			0xF4		// Keyboard response should be ACK and keyboard will continue
+												// to scan
+#define KBD_RESET_DISABLE_KEYBOARD	0xF5		// Reset to initial state and disable scan
+#define KBD_RESET_ENABLE_KEYBOARD	0xF6		// Reset to initial state and enable scan
+#define KBD_SET_ALL_KEYS1			0xF7		// \ 
+#define KBD_SET_ALL_KEYS2			0xF8		// | Set autorepeat of the whole keyboard
+#define KBD_SET_ALL_KEYS3			0xF9		// /
+#define KBD_SET_ALL_TYPEMATIC_MAKE_BREAK  0xFA	// Make break code
+#define KBD_SET_KEY_TYPES1			0xFB		// \ 
+#define KBD_SET_KEY_TYPES2			0xFC		// | Set autorepeat of keys
+#define KBD_SET_KEY_TYPES3			0xFD		// /
+#define KBD_RESEND					0xFE		// Resend last byte
+#define KBD_RESET_AND_TEST			0xFF		// Reset and test keyboard
+
+//
+// Keyboard responses
+//
+
+#define KBD_KEY_DETECTION_ERROR_1	0x00
+#define KBD_ECHO_RESPONSE			0xEE
+#define KBD_BREAK_PREFIX			0xF0
+#define KBD_COMPLETE_SUCCESS		0xAA
+#define KBD_COMPLETE_FAILURE		0xFC
+#define KBD_KEY_DETECTION_ERROR_2_3	0xFF
+#define KBD_BREAK_CODE				0xF0
+#define KBD_DEBUG_HOTKEY_ENH		0x37 // SysReq scan code for Enhanced Keyboard
+#define KBD_DEBUG_HOTKEY_AT			0x54 // SysReq scan code for 84-key AT Keyboard
+
+/******************************************************************\
+ *            mouse registers, commans, responses                 *
+\******************************************************************/
+
+//
+// Mouse commands (through 8042 data port)
+//
+
+#define MOUSE_SET_RESOLUTION		0xE8
+#define MOUSE_SET_SAMPLING_RATE		0xF3
+#define MOUSE_RESET					0xFF
+#define MOUSE_ENABLE_TRANSMISSION	0xF4
+#define MOUSE_SET_SCALING_1TO1		0xE6
+#define MOUSE_READ_STATUS			0xE9
+#define MOUSE_GET_DEVICE_ID			0xF2
+
+//
+// Mouse responses
+//
+
+#define MOUSE_COMPLETE				0xAA
+#define MOUSE_ID_BYTE				0x00
+#define MOUSE_WHEELMOUSE_ID_BYTE	0x03
+
+
+/******************************************************************\
+ *            8042 macroses for port access                       *
+\******************************************************************/
+
+#define I8X_GET_STATUS_BYTE()	READ_PORT_UCHAR((PUCHAR)0x64)
+
+#define I8X_GET_DATA_BYTE()		READ_PORT_UCHAR((PUCHAR)0x60)
+
+#define I8X_WRITE_COMMAND_BYTE(BYTE)	WRITE_PORT_UCHAR((PUCHAR)0x64, (BYTE))
+
+#define I8X_WRITE_DATA_BYTE(BYTE)		WRITE_PORT_UCHAR((PUCHAR)0x60, (BYTE))
+
+
+#define I8042_RESEND_ITERATIONS		200
+#define I8042_POLLSTATUS_ITERATIONS	20
+#define I8042_POLLING_ITERATIONS	1000
+#define I8042_STALL_MICROSECONDS	50
+
+#endif
diff --git a/8042/8042.opt b/8042/8042.opt
diff --git a/8042/8042.res b/8042/8042.res
diff --git a/8042/8042.sln b/8042/8042.sln
@@ -0,0 +1,19 @@
+Microsoft Visual Studio Solution File, Format Version 10.00
+# Visual C++ Express 2008
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "8042", "8042.vcproj", "{27A67058-A316-408D-BA5D-BFA39D24448F}"
+EndProject
+Global
+	GlobalSection(SolutionConfigurationPlatforms) = preSolution
+		Debug|Win32 = Debug|Win32
+		Release|Win32 = Release|Win32
+	EndGlobalSection
+	GlobalSection(ProjectConfigurationPlatforms) = postSolution
+		{27A67058-A316-408D-BA5D-BFA39D24448F}.Debug|Win32.ActiveCfg = Debug|Win32
+		{27A67058-A316-408D-BA5D-BFA39D24448F}.Debug|Win32.Build.0 = Debug|Win32
+		{27A67058-A316-408D-BA5D-BFA39D24448F}.Release|Win32.ActiveCfg = Release|Win32
+		{27A67058-A316-408D-BA5D-BFA39D24448F}.Release|Win32.Build.0 = Release|Win32
+	EndGlobalSection
+	GlobalSection(SolutionProperties) = preSolution
+		HideSolutionNode = FALSE
+	EndGlobalSection
+EndGlobal