owlcms-firmata 2.1.1

Changes since 2.0.0

• 2.1.1: Do not overwrite files on startup, to work with firmata-controlpanel 0.9.1 simplified updating.

• 2.1.0: fix to work with version 55.3

• 2.0.8: work with a control panel similar to that of owlcms

  • the control panel will pass additional options to tell where the configuration files are and what port to use.

• 2.0.6: fixed the configuration selection to work on Linux and Raspberry Pi.

• 2.0.5: clientId now less than 23 characters to prevent spurious error message in owlcms

• host/port/username from last connection are saved and restored on next start

• The Windows setup was not copying the default configuration files to the owlcms/devices directory in the user HOMEDIR.

• The detection of the remote platforms has been made more robust.

• The default port is now 8090 to avoid conflicts with owlcms

Release 2.0

• Complete rework of the user interface

  • See the INSTRUCTIONS.md file in the repository

• A single instance of the program can handle multiple connected devices

• Detection of the connected devices.

• The name of the firmware is used to locate the matching configuration file by default.

Known issues

• If several browsers are run at the same time display between browsers will not be synchronized. Normally only one at a time is needed anyway.

owlcms-firmata 2.1.0

Changes since 2.0.0

• 2.1.0: fix to work with version 55.3

• 2.0.8: work with a control panel similar to that of owlcms

  • the control panel will pass additional options to tell where the configuration files are and what port to use.

• 2.0.6: fixed the configuration selection to work on Linux and Raspberry Pi.

• 2.0.5: clientId now less than 23 characters to prevent spurious error message in owlcms

• host/port/username from last connection are saved and restored on next start

• The Windows setup was not copying the default configuration files to the owlcms/devices directory in the user HOMEDIR.

• The detection of the remote platforms has been made more robust.

• The default port is now 8090 to avoid conflicts with owlcms

Release 2.0

• Complete rework of the user interface

  • See the INSTRUCTIONS.md file in the repository

• A single instance of the program can handle multiple connected devices

• Detection of the connected devices.

• The name of the firmware is used to locate the matching configuration file by default.

Known issues

• If several browsers are run at the same time display between browsers will not be synchronized. Normally only one at a time is needed anyway.

owlcms-firmata 2.0.8

Changes since 2.0.0

• 2.0.7: work with a control panel similar to that of owlcms

  • the control panel will pass additional options to tell where the configuration files are and what port to use.

• 2.0.6: fixed the configuration selection to work on Linux and Raspberry Pi.

• 2.0.5: clientId now less than 23 characters to prevent spurious error message in owlcms

• host/port/username from last connection are saved and restored on next start

• The Windows setup was not copying the default configuration files to the owlcms/devices directory in the user HOMEDIR.

• The detection of the remote platforms has been made more robust.

• The default port is now 8090 to avoid conflicts with owlcms

Release 2.0

• Complete rework of the user interface

  • See the INSTRUCTIONS.md file in the repository

• A single instance of the program can handle multiple connected devices

• Detection of the connected devices.

• The name of the firmware is used to locate the matching configuration file by default.

Known issues

• If several browsers are run at the same time display between browsers will not be synchronized. Normally only one at a time is needed anyway.

owlcms-firmata 2.0.7

Changes since 2.0.0

• 2.0.7: work with a control panel similar to that of owlcms

  • the control panel will pass additional options to tell where the configuration files are and what port to use.

• 2.0.6: fixed the configuration selection to work on Linux and Raspberry Pi.

• 2.0.5: clientId now less than 23 characters to prevent spurious error message in owlcms

• host/port/username from last connection are saved and restored on next start

• The Windows setup was not copying the default configuration files to the owlcms/devices directory in the user HOMEDIR.

• The detection of the remote platforms has been made more robust.

• The default port is now 8090 to avoid conflicts with owlcms

Release 2.0

• Complete rework of the user interface

  • See the INSTRUCTIONS.md file in the repository

• A single instance of the program can handle multiple connected devices

• Detection of the connected devices.

• The name of the firmware is used to locate the matching configuration file by default.

Known issues

• If several browsers are run at the same time display between browsers will not be synchronized. Normally only one at a time is needed anyway.

owlcms-firmata 2.0.6

Changes since 2.0.0

• 2.0.6: fixed the configuration selection to work on Linux and Raspberry Pi.
• 2.0.5: clientId now less than 23 characters to prevent spurious error message in owlcms
• host/port/username from last connection are saved and restored on next start
• The Windows setup was not copying the default configuration files to the owlcms/devices directory in the user HOMEDIR.
• The detection of the remote platforms has been made more robust.
• The default port is now 8090 to avoid conflicts with owlcms

Release 2.0

• Complete rework of the user interface

  • See the INSTRUCTIONS.md file in the repository

• A single instance of the program can handle multiple connected devices

• Detection of the connected devices.

• The name of the firmware is used to locate the matching configuration file by default.

Known issues

• If several browsers are run at the same time display between browsers will not be synchronized. Normally only one at a time is needed anyway.

owlcms-firmata 2.0.5

Changes since 2.0.0

• clientId now less than 23 characters to prevent spurious error message in owlcms
• host/port/username from last connection are saved and restored on next start
• The Windows setup was not copying the default configuration files to the owlcms/devices directory in the user HOMEDIR.
• The detection of the remote platforms has been made more robust.
• The default port is now 8090 to avoid conflicts with owlcms

Release 2.0

• Complete rework of the user interface

  • See the INSTRUCTIONS.md file in the repository

• A single instance of the program can handle multiple connected devices

• Detection of the connected devices.

• The name of the firmware is used to locate the matching configuration file by default.

Known issues

• If several browsers are run at the same time display between browsers will not be synchronized. Normally only one at a time is needed anyway.

owlcms-firmata 2.0.4

Changes since 2.0.0

• host/port/username from last connection are saved and restored on next start
• The Windows setup was not copying the default configuration files to the owlcms/devices directory in the user HOMEDIR.
• The detection of the remote platforms has been made more robust.
• The default port is now 8090 to avoid conflicts with owlcms

Release 2.0

• Complete rework of the user interface

  • See the INSTRUCTIONS.md file in the repository

• A single instance of the program can handle multiple connected devices

• Detection of the connected devices.

• The name of the firmware is used to locate the matching configuration file by default.

Known issues

• If several browsers are run at the same time display between browsers will not be synchronized. Normally only one at a time is needed anyway.

owlcms-firmata 2.0.3

Changes since 2.0.0

• The Windows setup was not copying the default configuration files to the owlcms/devices directory in the user HOMEDIR.
• The detection of the remote platforms has been made more robust.
• The default port is now 8090 to avoid conflicts with owlcms

Release 2.0

• Complete rework of the user interface

  • See the INSTRUCTIONS.md file in the repository

• A single instance of the program can handle multiple connected devices

• Detection of the connected devices.

• The name of the firmware is used to locate the matching configuration file by default.

Known issues

• If several browsers are run at the same time display between browsers will not be synchronized. Normally only one at a time is needed anyway.

owlcms-firmata 2.0.2

Changes since 2.0.0

• The Windows setup was not copying the default configuration files to the owlcms/devices directory in the user HOMEDIR.
• The default port is now 8090 to avoid conflicts with owlcms

Release 2.0

• Complete rework of the user interface

  • See the INSTRUCTIONS.md file in the repository

• A single instance of the program can handle multiple connected devices

• Detection of the connected devices.

• The name of the firmware is used to locate the matching configuration file by default.

Known issues

• None, but this is a brand-new release, so test accordingly.

owlcms-firmata 2.0.1

Changes since 2.0.0

• The Windows setup was not copying the default configuration files to the owlcms/devices directory in the user HOMEDIR.

Release 2.0

• Complete rework of the user interface

  • See the INSTRUCTIONS.md file in the repository

• A single instance of the program can handle multiple connected devices

• Detection of the connected devices.

• The name of the firmware is used to locate the matching configuration file by default.

Known issues

• None, but this is a brand-new release, so test accordingly.