Add support to nucleo h563zi

[patrickelectric]

Fix #730

[patrickelectric]

ping @valeros

[valeros]

Hi @patrickelectric, please review my comments above.

[patrickelectric]

@valeros check now, everything should be fixed

[valeros]

check now, everything should be fixed

Thanks, have you tested this board with PlatformIO? Does it work as expected?

[patrickelectric]

check now, everything should be fixed

Thanks, have you tested this board with PlatformIO? Does it work as expected?

I did it using openocd, I know that the platformio openocd package does not support it but I'm using the OpenOCD of STM.

[valeros]

I did it using openocd, I know that the platformio openocd package does not support it but I'm using the OpenOCD of STM.

I see. Honestly, I’m a bit hesitant to add a new board that we can’t program or debug with our current tools. The latest stable OpenOCD doesn’t support the H5 family, and we don’t use any OpenOCD forks. So, basically, you’ll have to drop st-link and cmsis-dap from the list of upload protocols. That means the board will need to be programmed either through mass storage (which I think the latest ST-Links support) or using an external J-Link debug probe, but that’s going to make the developer experience pretty rough.

[ypearson-bdai]

its not so bad, just care about building the binary, There are other options to flash other than openocd

[patrickelectric]

its not so bad, just care about building the binary, There are other options to flash other than openocd

Yeah, the binary is working fine.

[ypearson-bdai]

its not so bad, just care about building the binary, There are other options to flash other than openocd

Yeah, the binary is working fine.

Yeah this seems to working okay!

[patrickelectric]

@valeros I think that is fine as it is, once the tools update the support will be already there. Otherwise, we can just let people waiting.. and that's not good. I prefer to have an option than nothing at all.

[lm324bruno]

Hi there, any update on when we may expect that change request approved? Many thanks !!!!

[patrickelectric]

Ping @valeros

[valeros]

Hi @patrickelectric, if you insist on merging, then please remove unsupported tools from the debug and upload sections, so only mbed and jlink methods are left (mbed should be the default choice).

[lm324bruno]

any update? Sorry for bothering, but it seems platformio currently do not support any new nucleo144 boards, wondering if there's a chance to get at least one new board in ...

[patrickelectric]

@valeros debug and upload section removed.

[valeros]

@patrickelectric you shouldn't have removed the entire sections, only unsupported tools.

[patrickelectric]

@valeros let me know if it's correct now.

[valeros]

Thanks, merged.