Merge pull request #3 from vvaldez/volume_backed_images

Volume backed images

setup-kvm-and-openstack/build-rhosp-vm.sh

@@ -55,6 +55,8 @@ cmd virt-customize -a ${OSP_VM_IMAGE_PATH} \
   --run-command 'yum remove cloud-init* -y && \
     rpm -ivh http://rhos-release.virt.bos.redhat.com/repos/rhos-release/rhos-release-latest.noarch.rpm && \
     rhos-release 10 && \
+    yum install -y lvm2 libguestfs-tools && \
+    sed -i -e "s/issue_discards = .*$/issue_discards = 1/" /etc/lvm/lvm.conf && \
     systemctl disable NetworkManager' \
   --write /etc/sysconfig/network-scripts/ifcfg-eth1:'DEVICE=eth1
 BOOTPROTO=static
@@ -132,12 +134,16 @@ then
   echo "WARNING: ${FILESHARE_DEST_BASE}/${OSP_VM_NAME}/${OSP_VM_IMAGE_NAME} link exists, remove first?"
   rm -iv ${FILESHARE_DEST_BASE}/${OSP_VM_NAME}/${OSP_VM_IMAGE_NAME}
 fi
-cmd rsync -avP ${OSP_VM_IMAGE_PATH} ${FILESHARE_DEST_BASE}/${OSP_VM_NAME}/${OSP_VM_IMAGE_NAME}.${DATETIME}
+
+# Sparsify image
+cmd virt-sparsify ${OSP_VM_IMAGE_PATH} ${OSP_VM_IMAGE_PATH}-sparsified
+cmd rsync -avP ${OSP_VM_IMAGE_PATH}-sparsified ${FILESHARE_DEST_BASE}/${OSP_VM_NAME}/${OSP_VM_IMAGE_NAME}.${DATETIME}-sparsified
 
 # Create symlink to new image
 pushd ${FILESHARE_DEST_BASE}/${OSP_VM_NAME}/
-ln -s ${OSP_VM_IMAGE_NAME}.${DATETIME} ${OSP_VM_IMAGE_NAME}
+ln -s ${OSP_VM_IMAGE_NAME}.${DATETIME}-sparsified ${OSP_VM_IMAGE_NAME}
 popd
 
 # Remove running rhosp guest
 source remove-rhosp-vm.sh
+cmd rm -iv ${OSP_VM_IMAGE_PATH}-sparsified

setup-kvm-and-openstack/group_vars_all

@@ -32,8 +32,8 @@ OSP_VM_NAME=${LAB_NAME}-${OSP_NAME}
 OSP_VM_IMAGE_NAME=${OSP_VM_NAME}.qcow2
 OSP_VM_IMAGE_PATH=${IMAGE_LOCAL_DIR}/${OSP_VM_IMAGE_NAME}
 OSP_VM_HOSTNAME=${OSP_NAME}.${ADMIN_DOMAIN}
-OSP_VM_TOTAL_DISK_SIZE=100G
-OSP_VM_ROOT_DISK_SIZE=15G
+OSP_VM_TOTAL_DISK_SIZE=110G
+OSP_VM_ROOT_DISK_SIZE=10G
 OSP_BASE_IMAGE_NAME=rhel-guest-image-7.3-35.x86_64.qcow2
 OSP_BASE_IMAGE_URL=http://${FILESHARE_HOST}/fileshare/images/${OSP_BASE_IMAGE_NAME}
 OSP_BASE_IMAGE_PATH=${IMAGE_STAGING_DIR}/${OSP_BASE_IMAGE_NAME}

setup-kvm-and-openstack/openstack-scripts/answers.txt

@@ -42,7 +42,7 @@ CONFIG_HORIZON_INSTALL=y
 CONFIG_SWIFT_INSTALL=y
 
 # Specify 'y' to install OpenStack Metering (ceilometer). ['y', 'n']
-CONFIG_CEILOMETER_INSTALL=n
+CONFIG_CEILOMETER_INSTALL=y
 
 # Specify 'y' to install OpenStack Telemetry Alarming (Aodh). Note
 # Aodh requires Ceilometer to be installed as well. ['y', 'n']

setup-kvm-and-openstack/openstack-scripts/openstack-env-config.sh

@@ -42,7 +42,6 @@ prep() {
   fi
 
   # Enable lvm on second partition
-  cmd yum -y install lvm2
   cmd pvcreate /dev/sda2
   cmd vgcreate cinder-volumes /dev/sda2
   cmd vgchange -ay
@@ -58,15 +57,19 @@ packstack-install() {
 
 post-install-config() {
 	cmd echo "INFO: Starting function 'prepare-host'"
-	# Enable discards for lvm
-	cmd sed -i -e 's/issue_discards = .*$/issue_discards = 1/' /etc/lvm/lvm.conf
 
+	openstack-config --set /etc/cinder/cinder.conf lvm volume_clear none
+	openstack-config --set /etc/cinder/cinder.conf lvm image_upload_use_cinder_backend True
+	openstack-config --set /etc/cinder/cinder.conf lvm lvm_type thin
+	openstack-config --set /etc/cinder/cinder.conf DEFAULT glance_api_version 2
+	openstack-config --set /etc/cinder/cinder.conf DEFAULT allowed_direct_url_schemes cinder
+	openstack-config --set /etc/glance/glance-api.conf glance_store stores file,http,swift,cinder
+	openstack-config --set /etc/glance/glance-api.conf DEFAULT show_multiple_locations True
 	openstack-config --set /etc/nova/nova.conf DEFAULT scheduler_default_filters RetryFilter,AvailabilityZoneFilter,RamFilter,ComputeFilter,ComputeCapabilitiesFilter,ImagePropertiesFilter,ServerGroupAntiAffinityFilter,ServerGroupAffinityFilter,CoreFilter
 	openstack-config --set /etc/nova/nova.conf libvirt virt_type kvm
 	openstack-config --set /etc/nova/nova.conf libvirt cpu_mode host-passthrough
 	openstack-config --set /etc/nova/nova.conf libvirt hw_disk_discard unmap
 	openstack-config --set /etc/nova/nova.conf libvirt use_usb_tablet false
-	openstack-config --set /etc/cinder/cinder.conf lvm volume_clear none
 	openstack-config --set /etc/nova/nova.conf DEFAULT block_device_allocate_retries 120
 	openstack-config --set /etc/nova/nova.conf DEFAULT block_device_allocate_retries_interval 10
 	if "${EXTERNAL_ONLY}" == "true"
@@ -142,33 +145,94 @@ chown ${USERNAME}:${USERNAME} /home/${USERNAME}/keystonerc_${USERNAME}
 }
 
 create-images() {
-  # Logging everything except the image creation
-	cmd echo "INFO: Starting function 'create-images'"
-  if [ "${IMAGE_IS_PUBLIC}" = true ]
+  # image creation
+  cmd echo "INFO: Starting function 'create-images'"
+  source /root/keystonerc_${USERNAME}
+
+  if ! glance image-list | grep image-base-src
   then
-    source /root/keystonerc_admin
-    IMAGE_IS_PUBLIC_OPTION="--public"
-  else
-    source /root/keystonerc_${USERNAME}
-    IMAGE_IS_PUBLIC_OPTION=
+    cmd openstack image create \
+      --disk-format raw \
+      --container-format bare \
+      --property hw_scsi_model=virtio-scsi \
+      --property hw_disk_bus=scsi \
+      --min-disk 10 \
+      --file ${OPENSHIFT_IMAGE_PATH} \
+      image-base-src
+  fi
+	# wait for image to become active
+	echo -en "\nWaiting for image-base-src image to create"
+  counter=0
+	while :
+	do
+    counter=$(( $counter + 1 ))
+		echo -n "."
+		sleep 1
+	  if openstack image show image-base-src -f value -c status | grep -q active
+    then
+      break
+    fi
+    if [ $counter -gt $TIMEOUT ]
+    then
+      echo ERROR: something went wrong - check console
+      exit 1
+    elif [ $counter -eq $TIMEOUT_WARN ]
+    then
+      echo -n "WARN: this is taking longer than expected"
+    fi
+	done
+	echo ""
+  if ! glance image-list | grep ${OPENSHIFT_VM_NAME}
+  then
+    cmd openstack volume create \
+      --image image-base-src \
+      --size 10 \
+      ${OPENSHIFT_VM_NAME}
+    cmd openstack image create \
+      --disk-format raw \
+      --protected \
+      --container-format bare \
+      --property hw_scsi_model=virtio-scsi \
+      --property hw_disk_bus=scsi \
+      --min-disk 10 \
+      ${OPENSHIFT_VM_NAME}
+    echo -en "\nWaiting for ${OPENSHIFT_VM_NAME} volume to create"
+    counter=0
+    while :
+    do
+      counter=$(( $counter + 1 ))
+      echo -n "."
+      sleep 2
+      if openstack volume show ${OPENSHIFT_VM_NAME} -f value -c status | grep -q available
+      then
+        break
+      fi
+      if [ $counter -gt $TIMEOUT ]
+      then
+        echo ERROR: something went wrong - check console
+        exit 1
+      elif [ $counter -eq $TIMEOUT_WARN ]
+      then
+        echo -n "WARN: this is taking longer than expected"
+      fi
+    done
+    echo ""
+    VOLUME_ID=$(openstack volume show ${OPENSHIFT_VM_NAME} -f value -c id)
+    IMAGE_ID=$(openstack image show ${OPENSHIFT_VM_NAME} -f value -c id)
+    if openstack image list | grep -qi error
+    then
+      echo "ERROR: Image creation failed"
+      exit 1
+    fi
+    if openstack volume list | grep -qi error
+    then
+      echo "ERROR: Volume creation failed"
+      exit 1
+    fi
+    cmd glance location-add ${IMAGE_ID} --url cinder://${VOLUME_ID}
+    cmd virt-sparsify /dev/cinder-volumes/volume-${VOLUME_ID} --in-place
+    cmd openstack image delete image-base-src
   fi
-	if [ "${VERBOSE}" = true ]
-	then
-		echo "INFO: Setting IMAGE_IS_PUBLIC_OPTION to '${IMAGE_IS_PUBLIC_OPTION}'"
-	fi
-	if ! glance image-list | grep ${OPENSHIFT_VM_NAME}
-	then
-		cmd openstack image create \
-			 ${IMAGE_IS_PUBLIC_OPTION} \
-			 --disk-format qcow2 \
-       --protected \
-			 --container-format bare \
-			 --property hw_scsi_model=virtio-scsi \
-			 --property hw_disk_bus=scsi \
-			 --min-disk 10 \
-			 --file ${OPENSHIFT_IMAGE_PATH} \
-			 ${OPENSHIFT_VM_NAME}
-	fi
   cmd openstack image show ${OPENSHIFT_VM_NAME}
   cmd rm -vf ${OPENSHIFT_IMAGE_PATH}
 }
@@ -246,9 +310,9 @@ build-instances() {
     then
       echo ERROR: something went wrong - check console
       exit 1
-    elif [ $counter -gt $TIMEOUT_WARN ]
+    elif [ $counter -eq $TIMEOUT_WARN ]
     then
-      echo WARN: this is taking longer than expected
+      echo -n "WARN: this is taking longer than expected"
     fi
 	done
 	echo ""
@@ -279,11 +343,11 @@ verify-networking() {
     fi
     if [ $counter -gt $TIMEOUT ]
     then
-      echo ERROR: something went wrong - check console
+      echo "ERROR: something went wrong - check console"
       exit 1
-    elif [ $counter -gt $TIMEOUT_WARN ]
+    elif [ $counter -eq $TIMEOUT_WARN ]
     then
-      echo WARN: this is taking longer than expected
+      echo -n "WARN: this is taking longer than expected"
     fi
 	done
 	echo ""
@@ -309,14 +373,14 @@ cleanup() {
     fi
     if [ $counter -gt $TIMEOUT ]
     then
-      echo ERROR: something went wrong - check console
+      echo "ERROR: something went wrong - check console"
       exit 1
-    elif [ $counter -gt $TIMEOUT_WARN ]
+    elif [ $counter -eq $TIMEOUT_WARN ]
     then
-      echo WARN: this is taking longer than expected
+      echo -n "WARN: this is taking longer than expected"
     fi
   done
-   echo ""
+  echo ""
   echo -n "Waiting for openshift-base-volume to be deleted"
   counter=0
   while :
@@ -330,11 +394,11 @@ cleanup() {
     fi
     if [ $counter -gt $TIMEOUT ]
     then
-      echo ERROR: something went wrong - check console
+      echo "ERROR: something went wrong - check console"
       exit 1
-    elif [ $counter -gt $TIMEOUT_WARN ]
+    elif [ $counter -eq $TIMEOUT_WARN ]
     then
-      echo WARN: this is taking longer than expected
+      echo -n "WARN: this is taking longer than expected"
     fi
   done
   echo ""
@@ -349,6 +413,7 @@ post-install-config 2>&1 | tee -a ${LOGFILE}
 post-install-admin-tasks 2>&1 | tee -a ${LOGFILE}
 create-images 2>&1 | tee -a ${LOGFILE}
 post-install-user-tasks 2>&1 | tee -a ${LOGFILE}
+# Commenting out the following functions intentionally to avoid local image cache creation in /var/lib/nova/instances
 #build-instances 2>&1 | tee -a ${LOGFILE}
 #source /root/keystonerc_${USERNAME}
 #if nova list | grep ERROR

setup-kvm-and-openstack/openstack-scripts/scenario-all-in-one

@@ -1,6 +1,6 @@
 echo "INFO: Loading scenario-all-in-one"
 
-TIMEOUT=60
+TIMEOUT=120
 TIMEOUT_WARN=$(( $TIMEOUT / 2 ))
 # Set the following to the version of RHELOSP to install, see the following array for all versions or run rhos-release -l
 RHELOSP_VERSION=10
@@ -45,9 +45,6 @@ COMPUTE_HOSTS=${CONTROLLER_HOST}
 NETWORK_HOSTS=${CONTROLLER_HOST}
 PRIVATE_NETWORK=
 
-#Images
-IMAGE_IS_PUBLIC=true
-
 # OpenShift image
 OPENSHIFT_IMAGE_PATH=/tmp/L104353-openshift-base.qcow2
 OPENSHIFT_VM_NAME=openshift-base