Update docs for Shim v0.15.0 release

Signed-off-by: Kate Goldenring <[email protected]>
spinkube · Jun 26, 2024 · 824d744 · 824d744
1 parent 374860f
commit 824d744
Show file tree

Hide file tree

Showing 10 changed files with 14 additions and 15 deletions.
diff --git a/content/en/docs/containerd-shim-spin/_index.md b/content/en/docs/containerd-shim-spin/_index.md
@@ -19,10 +19,9 @@ Overall, the Containerd Shim Spin represents a significant advancement in integr
 
 Below is a table of the shims and the the most recent versions of the shims that are supported by this project.
 
-| **shim version** | v0.12.0                                                                          | v0.13.0                                                                            | v0.14.0                                                                             | v0.14.1                                                                             |
-| ---------------- | -------------------------------------------------------------------------------- | -------------------------------------------------------------------------------- | -------------------------------------------------------------------------------- | -------------------------------------------------------------------------------- | 
-| **spin**         | [v2.2.0](https://github.com/fermyon/spin/releases/tag/v2.2.0)                    | [v2.3.1](https://github.com/fermyon/spin/releases/tag/v2.3.1)                    | [v2.4.2](https://github.com/fermyon/spin/releases/tag/v2.4.2)                    | [v2.4.3](https://github.com/fermyon/spin/releases/tag/v2.4.3)                    |
-
+| **shim version** | v0.12.0                                                       | v0.13.0                                                       | v0.14.0                                                       | v0.14.1                                                       | v0.15.0                                                       |
+| ---------------- | ------------------------------------------------------------- | ------------------------------------------------------------- | ------------------------------------------------------------- | ------------------------------------------------------------- | ------------------------------------------------------------- |
+| **spin**         | [v2.2.0](https://github.com/fermyon/spin/releases/tag/v2.2.0) | [v2.3.1](https://github.com/fermyon/spin/releases/tag/v2.3.1) | [v2.4.2](https://github.com/fermyon/spin/releases/tag/v2.4.2) | [v2.4.3](https://github.com/fermyon/spin/releases/tag/v2.4.3) | [v2.6.0](https://github.com/fermyon/spin/releases/tag/v2.6.0) |
 
 ## Installing the `containerd-shim-spin` on Kubernetes Nodes
 

diff --git a/content/en/docs/glossary/_index.md b/content/en/docs/glossary/_index.md
@@ -44,7 +44,7 @@ kind: SpinApp
 metadata:
   name: simple-spinapp
 spec:
-  image: "ghcr.io/spinkube/containerd-shim-spin/examples/spin-rust-hello:v0.14.1"
+  image: "ghcr.io/spinkube/containerd-shim-spin/examples/spin-rust-hello:v0.15.0"
   replicas: 1
   executor: "containerd-shim-spin"
 ```
@@ -59,7 +59,7 @@ kind: SpinApp
 metadata:
   name: simple-spinapp
 spec:
-  image: 'ghcr.io/spinkube/containerd-shim-spin/examples/spin-rust-hello:v0.14.1'
+  image: 'ghcr.io/spinkube/containerd-shim-spin/examples/spin-rust-hello:v0.15.0'
   replicas: 3
   imagePullSecrets:
     - name: spin-image-secret

diff --git a/content/en/docs/spin-operator/installation/installing-with-helm.md b/content/en/docs/spin-operator/installation/installing-with-helm.md
@@ -42,7 +42,7 @@ helm install \
   kwasm-operator kwasm/kwasm-operator \
   --namespace kwasm \
   --create-namespace \
-  --set kwasmOperator.installerImage=ghcr.io/spinkube/containerd-shim-spin/node-installer:v0.14.1
+  --set kwasmOperator.installerImage=ghcr.io/spinkube/containerd-shim-spin/node-installer:v0.15.0
 
 # Provision Nodes
 kubectl annotate node --all kwasm.sh/kwasm-node=true

diff --git a/content/en/docs/spin-operator/quickstart/_index.md b/content/en/docs/spin-operator/quickstart/_index.md
@@ -25,7 +25,7 @@ For this Quickstart in particular, you will need:
 
 ```console  { data-plausible="copy-quick-create-k3d" }
 k3d cluster create wasm-cluster \
-  --image ghcr.io/spinkube/containerd-shim-spin/k3d:v0.14.1 \
+  --image ghcr.io/spinkube/containerd-shim-spin/k3d:v0.15.0 \
   --port "8081:80@loadbalancer" \
   --agents 2
 ```

diff --git a/content/en/docs/spin-operator/support/troubleshooting.md b/content/en/docs/spin-operator/support/troubleshooting.md
@@ -90,14 +90,14 @@ helm install \
   --set kwasmOperator.installerImage=ghcr.io/spinkube/containerd-shim-spin/node-installer:v0.14.0
 ```
 
-Reissuing the above command with the new version `v0.14.1` will result in the following error - `Error: INSTALLATION FAILED: cannot re-use a name that is still in use`. To use the same command when installing and upgrading a release, use `upgrade --install` ([as referenced here in the official Helm documentation](https://v2.helm.sh/docs/developing_charts/#upgrade-a-release-idempotently)). For example: 
+Reissuing the above command with the new version `v0.15.0` will result in the following error - `Error: INSTALLATION FAILED: cannot re-use a name that is still in use`. To use the same command when installing and upgrading a release, use `upgrade --install` ([as referenced here in the official Helm documentation](https://v2.helm.sh/docs/developing_charts/#upgrade-a-release-idempotently)). For example: 
 
 ```console
 helm upgrade --install \
   kwasm-operator kwasm/kwasm-operator \
   --namespace kwasm \
   --create-namespace \
-  --set kwasmOperator.installerImage=ghcr.io/spinkube/containerd-shim-spin/node-installer:v0.14.1
+  --set kwasmOperator.installerImage=ghcr.io/spinkube/containerd-shim-spin/node-installer:v0.15.0
 ```
 
 ## Cluster Already Exists

diff --git a/content/en/docs/spin-operator/tutorials/deploy-on-azure-kubernetes-service.md b/content/en/docs/spin-operator/tutorials/deploy-on-azure-kubernetes-service.md
@@ -113,7 +113,7 @@ helm install \
   kwasm-operator kwasm/kwasm-operator \
   --namespace kwasm \
   --create-namespace \
-  --set kwasmOperator.installerImage=ghcr.io/spinkube/containerd-shim-spin/node-installer:v0.14.1
+  --set kwasmOperator.installerImage=ghcr.io/spinkube/containerd-shim-spin/node-installer:v0.15.0
 
 # Provision Nodes
 kubectl annotate node --all kwasm.sh/kwasm-node=true

diff --git a/content/en/docs/spin-operator/tutorials/integrating-with-docker-desktop.md b/content/en/docs/spin-operator/tutorials/integrating-with-docker-desktop.md
@@ -70,7 +70,7 @@ helm install \
   kwasm-operator kwasm/kwasm-operator \
   --namespace kwasm \
   --create-namespace \
-  --set kwasmOperator.installerImage=ghcr.io/spinkube/containerd-shim-spin/node-installer:v0.14.1
+  --set kwasmOperator.installerImage=ghcr.io/spinkube/containerd-shim-spin/node-installer:v0.15.0
 
 kubectl annotate node --all kwasm.sh/kwasm-node=true
 ```

diff --git a/content/en/docs/spin-operator/tutorials/running-locally.md b/content/en/docs/spin-operator/tutorials/running-locally.md
@@ -31,7 +31,7 @@ Run the following command to create a Kubernetes k3d cluster that has [the
 containerd-shim-spin](https://github.com/spinkube/containerd-shim-spin) pre-requisites installed:
 
 ```console
-k3d cluster create wasm-cluster --image ghcr.io/spinkube/containerd-shim-spin/k3d:v0.14.1 -p "8081:80@loadbalancer" --agents 2
+k3d cluster create wasm-cluster --image ghcr.io/spinkube/containerd-shim-spin/k3d:v0.15.0 -p "8081:80@loadbalancer" --agents 2
 ```
 
 Run the following command to install the Custom Resource Definitions (CRDs) into the cluster:

diff --git a/content/en/docs/spin-operator/tutorials/scaling-with-hpa.md b/content/en/docs/spin-operator/tutorials/scaling-with-hpa.md
@@ -27,7 +27,7 @@ Run the following command to create a Kubernetes cluster that has [the container
 
 ```console
 k3d cluster create wasm-cluster-scale \
-  --image ghcr.io/spinkube/containerd-shim-spin/k3d:v0.14.1 \
+  --image ghcr.io/spinkube/containerd-shim-spin/k3d:v0.15.0 \
   -p "8081:80@loadbalancer" \
   --agents 2
 ```

diff --git a/content/en/docs/spin-operator/tutorials/scaling-with-keda.md b/content/en/docs/spin-operator/tutorials/scaling-with-keda.md
@@ -27,7 +27,7 @@ Run the following command to create a Kubernetes cluster that has [the container
 
 ```console
 k3d cluster create wasm-cluster-scale \
-  --image ghcr.io/spinkube/containerd-shim-spin/k3d:v0.14.1 \
+  --image ghcr.io/spinkube/containerd-shim-spin/k3d:v0.15.0 \
   -p "8081:80@loadbalancer" \
   --agents 2
 ```