KittyCAD · adamchalmers · Feb 24, 2025 · Feb 25, 2025 · Feb 25, 2025 · Feb 25, 2025
diff --git a/docs/kcl/angleToMatchLengthY.md b/docs/kcl/angleToMatchLengthY.md
@@ -36,7 +36,7 @@ sketch001 = startSketchOn('XZ')
        angle = angleToMatchLengthY(seg01, 15, %),
        length = 5
      }, %)
-  |> yLineTo(0, %)
+  |> yLine(endAbsolute = 0)
   |> close()
 
 extrusion = extrude(sketch001, length = 5)

diff --git a/docs/kcl/angledLine.md b/docs/kcl/angledLine.md
@@ -31,10 +31,10 @@ angledLine(data: AngledLineData, sketch: Sketch, tag?: TagDeclarator) -> Sketch
 ```js
 exampleSketch = startSketchOn('XZ')
   |> startProfileAt([0, 0], %)
-  |> yLineTo(15, %)
+  |> yLine(endAbsolute = 15)
   |> angledLine({ angle = 30, length = 15 }, %)
   |> line(end = [8, -10])
-  |> yLineTo(0, %)
+  |> yLine(endAbsolute = 0)
   |> close()
 
 example = extrude(exampleSketch, length = 10)

diff --git a/docs/kcl/appearance.md b/docs/kcl/appearance.md
diff --git a/docs/kcl/asin.md b/docs/kcl/asin.md
@@ -37,7 +37,7 @@ sketch001 = startSketchOn('XZ')
        angle = toDegrees(asin(0.5)),
        length = 20
      }, %)
-  |> yLineTo(0, %)
+  |> yLine(endAbsolute = 0)
   |> close()
 
 extrude001 = extrude(sketch001, length = 5)

diff --git a/docs/kcl/atan.md b/docs/kcl/atan.md
@@ -37,7 +37,7 @@ sketch001 = startSketchOn('XZ')
        angle = toDegrees(atan(1.25)),
        length = 20
      }, %)
-  |> yLineTo(0, %)
+  |> yLine(endAbsolute = 0)
   |> close()
 
 extrude001 = extrude(sketch001, length = 5)

diff --git a/docs/kcl/atan2.md b/docs/kcl/atan2.md
@@ -38,7 +38,7 @@ sketch001 = startSketchOn('XZ')
        angle = toDegrees(atan2(1.25, 2)),
        length = 20
      }, %)
-  |> yLineTo(0, %)
+  |> yLine(endAbsolute = 0)
   |> close()
 
 extrude001 = extrude(sketch001, length = 5)

diff --git a/docs/kcl/ceil.md b/docs/kcl/ceil.md
@@ -35,7 +35,7 @@ sketch001 = startSketchOn('XZ')
   |> startProfileAt([0, 0], %)
   |> line(endAbsolute = [12, 10])
   |> line(end = [ceil(7.02986), 0])
-  |> yLineTo(0, %)
+  |> yLine(endAbsolute = 0)
   |> close()
 
 extrude001 = extrude(sketch001, length = 5)

diff --git a/docs/kcl/const_std-math-E.md b/docs/kcl/const_std-math-E.md
@@ -21,7 +21,7 @@ exampleSketch = startSketchOn("XZ")
     angle = 30,
     length = 2 * E ^ 2,
   }, %)
-  |> yLineTo(0, %)
+  |> yLine(endAbsolute = 0)
   |> close()
 
 example = extrude(exampleSketch, length = 10)

diff --git a/docs/kcl/const_std-math-TAU.md b/docs/kcl/const_std-math-TAU.md
@@ -21,7 +21,7 @@ exampleSketch = startSketchOn("XZ")
     angle = 50,
     length = 10 * TAU,
   }, %)
-  |> yLineTo(0, %)
+  |> yLine(endAbsolute = 0)
   |> close()
 
 example = extrude(exampleSketch, length = 5)

diff --git a/docs/kcl/e.md b/docs/kcl/e.md
@@ -31,7 +31,7 @@ e() -> number
 exampleSketch = startSketchOn("XZ")
   |> startProfileAt([0, 0], %)
   |> angledLine({ angle = 30, length = 2 * e() ^ 2 }, %)
-  |> yLineTo(0, %)
+  |> yLine(endAbsolute = 0)
   |> close()
 
 example = extrude(exampleSketch, length = 10)

diff --git a/docs/kcl/floor.md b/docs/kcl/floor.md
@@ -35,7 +35,7 @@ sketch001 = startSketchOn('XZ')
   |> startProfileAt([0, 0], %)
   |> line(endAbsolute = [12, 10])
   |> line(end = [floor(7.02986), 0])
-  |> yLineTo(0, %)
+  |> yLine(endAbsolute = 0)
   |> close()
 
 extrude001 = extrude(sketch001, length = 5)

diff --git a/docs/kcl/index.md b/docs/kcl/index.md
@@ -111,9 +111,7 @@ layout: manual
   * [`toDegrees`](kcl/toDegrees)
   * [`toRadians`](kcl/toRadians)
   * [`xLine`](kcl/xLine)
-  * [`xLineTo`](kcl/xLineTo)
   * [`yLine`](kcl/yLine)
-  * [`yLineTo`](kcl/yLineTo)
   * [`yd`](kcl/yd)
 * **`std::math`**
   * [`E`](kcl/const_std-math-E)

diff --git a/docs/kcl/pow.md b/docs/kcl/pow.md
@@ -35,7 +35,7 @@ pow(num: number, pow: number) -> number
 exampleSketch = startSketchOn("XZ")
   |> startProfileAt([0, 0], %)
   |> angledLine({ angle = 50, length = pow(5, 2) }, %)
-  |> yLineTo(0, %)
+  |> yLine(endAbsolute = 0)
   |> close()
 
 example = extrude(exampleSketch, length = 5)

diff --git a/docs/kcl/round.md b/docs/kcl/round.md
@@ -35,7 +35,7 @@ sketch001 = startSketchOn('XZ')
   |> startProfileAt([0, 0], %)
   |> line(endAbsolute = [12, 10])
   |> line(end = [round(7.02986), 0])
-  |> yLineTo(0, %)
+  |> yLine(endAbsolute = 0)
   |> close()
 
 extrude001 = extrude(sketch001, length = 5)

diff --git a/docs/kcl/sqrt.md b/docs/kcl/sqrt.md
@@ -34,7 +34,7 @@ sqrt(num: number) -> number
 exampleSketch = startSketchOn("XZ")
   |> startProfileAt([0, 0], %)
   |> angledLine({ angle = 50, length = sqrt(2500) }, %)
-  |> yLineTo(0, %)
+  |> yLine(endAbsolute = 0)
   |> close()
 
 example = extrude(exampleSketch, length = 5)

diff --git a/docs/kcl/startSketchOn.md b/docs/kcl/startSketchOn.md
@@ -134,9 +134,9 @@ a1 = startSketchOn({
      })
   |> startProfileAt([0, 0], %)
   |> line(end = [100.0, 0])
-  |> yLine(-100.0, %)
-  |> xLine(-100.0, %)
-  |> yLine(100.0, %)
+  |> yLine(length = -100.0)
+  |> xLine(length = -100.0)
+  |> yLine(length = 100.0)
   |> close()
   |> extrude(length = 3.14)
 ```

diff --git a/docs/kcl/std-math-cos.md b/docs/kcl/std-math-cos.md
@@ -33,7 +33,7 @@ exampleSketch = startSketchOn("XZ")
     angle = 30,
     length = 3 / cos(toRadians(30)),
   }, %)
-  |> yLineTo(0, %)
+  |> yLine(endAbsolute = 0)
   |> close()
 
 example = extrude(exampleSketch, length = 5)

diff --git a/docs/kcl/std-math-sin.md b/docs/kcl/std-math-sin.md
@@ -33,7 +33,7 @@ exampleSketch = startSketchOn("XZ")
     angle = 50,
     length = 15 / sin(toDegrees(135)),
   }, %)
-  |> yLineTo(0, %)
+  |> yLine(endAbsolute = 0)
   |> close()
 
 example = extrude(exampleSketch, length = 5)

diff --git a/docs/kcl/std-math-tan.md b/docs/kcl/std-math-tan.md
@@ -33,7 +33,7 @@ exampleSketch = startSketchOn("XZ")
     angle = 50,
     length = 50 * tan(1/2),
   }, %)
-  |> yLineTo(0, %)
+  |> yLine(endAbsolute = 0)
   |> close()
 
 example = extrude(exampleSketch, length = 5)